Fwd: Shelving in litho area

Dick Crane rcrane at stanford.edu
Fri Nov 11 15:51:59 PST 2005


Hi Paul,

I had Jim Haydon check the shelving unit and they are, in fact, equake 
braced. This unit is not tied to a wall since the height vs base rule 
was satisfied by cable tying two unit togather at right angles to each 
other. The glass dishes on top will need to be looked at.

Thanks,

Dick

Paul Rissman wrote:

> Hi Dick,
>
> When you get back can you check on this?
>
> Thanks,
>
> Paul
>
>> X-Sieve: CMU Sieve 2.2
>> Delivered-To: rissman at snf.stanford.edu
>> Mailing-List: contact safety-help at snf.stanford.edu; run by ezmlm
>> X-No-Archive: yes
>> List-Post: <mailto:safety at snf.stanford.edu>
>> List-Help: <mailto:safety-help at snf.stanford.edu>
>> List-Unsubscribe: <mailto:safety-unsubscribe at snf.stanford.edu>
>> List-Subscribe: <mailto:safety-subscribe at snf.stanford.edu>
>> Delivered-To: mailing list safety at snf.stanford.edu
>> Date: Thu, 10 Nov 2005 09:04:03 -0800
>> From: Beinn Muir <beinnmuir at stanford.edu>
>> To: safety at snf.stanford.edu
>> Subject: Shelving in litho area
>> User-Agent: Internet Messaging Program (IMP) 3.2.7
>> X-Authenticated-User: bomuir
>> X-Originating-IP: 70.231.158.226
>>
>>
>>
>> Hi all,
>>
>> I noticed yesterday when going around the lab that the shelves in the 
>> litho
>> area (opposite the YES oven) are not bolted to the ground or the wall. I
>> was under the impression that in an earthquake zone this was a 
>> necessity.
>> There was also a number of glass dishes stored on the top of the 
>> shelves,
>> with nothing to stop them falling off in even a minor shake. What is the
>> policy regarding this in the SNF lab?
>>
>> Thanks!
>>
>> Best regards,
>> Beinn...
>
>





More information about the safety mailing list