From msuggs at snf.stanford.edu Sat Jul 7 10:40:08 2007 From: msuggs at snf.stanford.edu (msuggs at snf.stanford.edu) Date: Sat, 7 Jul 2007 10:40:08 -0700 Subject: Problem sem4160 SNF 2007-07-07 10:40:08: No image on screen Message-ID: Magnification was set to 3.5K. No Image appeared. magnification wheel not working From huangzb at snf.stanford.edu Sun Jul 8 00:04:07 2007 From: huangzb at snf.stanford.edu (huangzb at snf.stanford.edu) Date: Sun, 8 Jul 2007 00:04:07 -0700 Subject: Problem sem4160 SNF 2007-07-08 00:04:06: image taking Message-ID: When taking the image, the scale bar did not show up in the image From mtang at snf.stanford.edu Tue Jul 10 09:22:16 2007 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Tue, 10 Jul 2007 09:22:16 -0700 Subject: Problem sem4160 SNF 2007-07-07 10:40:08: No image on screen Message-ID: Take it out of "photo" mode From mtang at snf.stanford.edu Tue Jul 10 09:22:31 2007 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Tue, 10 Jul 2007 09:22:31 -0700 Subject: Problem sem4160 SNF 2007-07-08 00:04:06: image taking Message-ID: Needs to be taken out of photo mode. From karthikv at snf.stanford.edu Mon Jul 16 22:05:08 2007 From: karthikv at snf.stanford.edu (karthikv at snf.stanford.edu) Date: Mon, 16 Jul 2007 22:05:08 -0700 Subject: Problem sem4160 SNF 2007-07-16 22:05:07: SEC valve is not opening Message-ID: The SEC valve is not opening when i flip the switch to "open" position. Pressure readings are all right and the light indicate that it is OK to open the valve. From jwc at snf.stanford.edu Tue Jul 17 10:24:43 2007 From: jwc at snf.stanford.edu (James Conway) Date: Tue, 17 Jul 2007 10:24:43 -0700 Subject: Problem sem4160 SNF 2007-07-16 22:05:07: SEC valve is not opening Message-ID: <469CFB5B.4010007@snf.stanford.edu> Be sure to ensure that the loading rod is fully pulled back into its retracted position. There is a micro-switch that is interlocked to the SEC Valve functionality. Best, James Conway karthikv at snf.stanford.edu wrote: > The SEC valve is not opening when i flip the switch to "open" position. Pressure readings are all right and the light indicate that it is OK to open the valve. > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jerabek at snf.stanford.edu Tue Jul 17 11:15:18 2007 From: jerabek at snf.stanford.edu (jerabek at snf.stanford.edu) Date: Tue, 17 Jul 2007 11:15:18 -0700 Subject: Problem sem4160 SNF 2007-07-16 22:05:07: SEC valve is not opening Message-ID: I've checked it out and it's working properly. Y've probably forgot to enable SEM on coral.