From tberg at snf.stanford.edu Thu Feb 9 06:07:15 2012 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Thu, 9 Feb 2012 06:07:15 -0800 Subject: Problem sem4160 SNF 2012-02-09 06:07:14: SEM is back in High Vac Message-ID: Have Image, james will check out as time is available From tberg at snf.stanford.edu Thu Feb 9 06:08:43 2012 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Thu, 9 Feb 2012 06:08:43 -0800 Subject: Shutdown sem4160 SNF 2011-12-14 07:02:45: Renovation Message-ID: System is back in high vac and we have an image. Further checkout needed. Found main AC plug disconnected under the floor. From jwc at snf.stanford.edu Thu Feb 16 17:40:41 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Thu, 16 Feb 2012 17:40:41 -0800 Subject: Problem sem4160 SNF 2012-02-09 06:07:14: SEM is back in High Vac Message-ID: system check out OK full qualification next week or tomorrow From jwc at snf.stanford.edu Tue Feb 21 17:29:30 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Tue, 21 Feb 2012 17:29:30 -0800 Subject: Problem sem4160 SNF 2012-02-21 17:29:30: NO image on Image acquisition Message-ID: tested system today and all is good with SEM for brightness and resolution. However on the QUARTZ PCI interface for Image acquisition I see the scan line sync with the scan line on the CRT screen on the SEM -- BUT DO NOT observe a SE image on the QUARTZ PCI software screen. Plugged in power to FPD and the PC and they are OK. Checked loose wires and found no open connections. Maybe Ted will see something new... JWC From tberg at snf.stanford.edu Wed Feb 22 07:33:19 2012 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 22 Feb 2012 07:33:19 -0800 Subject: Problem sem4160 SNF 2012-02-21 17:29:30: NO image on Image acquisition Message-ID: Re connected Video cable to computer From jwc at snf.stanford.edu Wed Feb 22 11:57:25 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Wed, 22 Feb 2012 11:57:25 -0800 Subject: Comment sem4160 SNF 2012-02-22 11:57:25: excellent resolution and brightness Message-ID: checked system again on Au on Carbon in the five to six nm range at 30, 10 and 5 kev Measurements from images collected pending Image acq works fine -- Thank you Ted JWC