From jwc at snf.stanford.edu Fri Feb 4 14:48:45 2011 From: jwc at snf.stanford.edu (James W. Conway) Date: Fri, 04 Feb 2011 14:48:45 -0800 Subject: Comment sem4160 SNF 2011-02-04 10:15:44: Aliginment Message-ID: <4D4C824D.2070801@snf.stanford.edu> I checked it out and it seems fine. The following user complimented the state of the tool compared to two weeks ago. Thank you JWC On 2/4/2011 10:15 AM, takashifuse at snf.stanford.edu wrote: > Someone completly had moved off the aperture. > I have tried to back to center. > But I think it's not perfect. > Now SEM4160 can get x100 magnification with 30kV Acc. > If need more high magnification image, please ask James. > Thank you > From jwc at snf.stanford.edu Thu Feb 10 09:00:05 2011 From: jwc at snf.stanford.edu (James W. Conway) Date: Thu, 10 Feb 2011 09:00:05 -0800 Subject: Problem sem4160 SNF 2011-02-09 21:58:27: Right (camera) screen is off Message-ID: <4D541995.8060108@snf.stanford.edu> FYI: all that happened is you saturated the IR camera with signal... It quickly recovers and if you turn down the right hand screen brightness this should not occur. Best James On 2/9/2011 9:58 PM, dkozak at snf.stanford.edu wrote: > Right screen was on and working properly. > Moved the stage into the chamber and moved the stage to 75, 75 (center position). > While the stage was moving, the screen blinked and turned off. > Switching the screen to SEM mode works -- it displays propely the same as left screen. When switching back to camera mode, doesn't display anything again. > From dwnam at stanford.edu Fri Feb 11 10:51:31 2011 From: dwnam at stanford.edu (Donguk Nam) Date: Fri, 11 Feb 2011 10:51:31 -0800 Subject: SEM4160 is free from 11am In-Reply-To: References: Message-ID: Sorry for the late notice. Donguk -------------- next part -------------- An HTML attachment was scrubbed... URL: From eperalta at stanford.edu Mon Feb 28 17:51:38 2011 From: eperalta at stanford.edu (Edgar Peralta) Date: Mon, 28 Feb 2011 17:51:38 -0800 Subject: please bring up SEM Message-ID: Hello all, Could whoever has admin privileges please bring up the SEM? It appears that an inexperienced user shut it down instead of disabling it!!! To the user responsible, next time you don't know how to do something, please ask instead of experimenting. This is a shared facility and having a tool shut down for no reason affects people's work schedule unnecessarily. Edgar -------------- next part -------------- An HTML attachment was scrubbed... URL: