chemicals

Mahnaz Mansourpour mahnaz at snf.stanford.edu
Thu Sep 30 16:40:36 PDT 2004


Hi carlos,

I will need more info on omni coat and developer as well.

thanks
mahnaz

Mary Tang wrote:

> Hi Carlos --
>
> Could you please review the procedures on our website at:
>
> http://snf.stanford.edu/Materials/NewMatProc.html
>
> We would like to see MSDS sheets for each chemical (electronic copy is
> preferred as we are building an electronic MSDS databse) and any
> relevant application notes or literature references as appropriate.  We
> would also like to know where you plan to use these chemicals and what
> your process flow is (specific as possible, please.)
>
> SU-8 is a contamination problem in the lab -- once it cures, it's
> impossible to remove, which can cause damage to equipment (and thus
> potentially other people's work.)  If you work with SU-8, you will need
> to speak with Mahnaz about what lab ware you can use and any special
> precautions which are required to control where the SU-8 goes.
>
> Thanks,
>
> Mary
>
> chernand at chem.ucla.edu wrote:
>
> >Hi,
> >
> >My name is Carlos Hernandez and I would like to bring in the following
> >chemicals into the lab.
> >
> >SU-8 2000.5
> >SU-8 2025
> >SU8 Thinner
> >SU8 developer
> >Omnicoat
> >Omnicoat Developer
> >
> >Is there any information that you need to know.
> >
> >Carlos
> >
> >
> >
> >
>
> --
> Mary X. Tang, Ph.D.
> Stanford Nanofabrication Facility
> CIS Room 136, Mail Code 4070
> Stanford, CA  94305
> (650)723-9980
> mtang at stanford.edu
> http://snf.stanford.edu




More information about the specmat mailing list