From eenriquez at snf.stanford.edu Mon Jul 6 08:53:43 2009 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 6 Jul 2009 08:53:43 -0700 Subject: Problem stsetch SNF 2009-06-29 16:20:29: ICP transfer mode failure Message-ID: Problem has not re-occured since the system was reset last Tuesday. From eenriquez at snf.stanford.edu Mon Jul 6 08:53:48 2009 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 6 Jul 2009 08:53:48 -0700 Subject: Problem stsetch SNF 2009-06-29 15:03:23: again, it idle at "pumping out" step Message-ID: Problem has not re-occured since the system was reset last Tuesday. From eenriquez at snf.stanford.edu Mon Jul 6 08:53:57 2009 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 6 Jul 2009 08:53:57 -0700 Subject: Comment stsetch SNF 2009-06-28 20:49:56: Machine working OK Message-ID: Archived From eenriquez at snf.stanford.edu Mon Jul 6 08:54:02 2009 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 6 Jul 2009 08:54:02 -0700 Subject: Problem stsetch SNF 2009-06-28 16:38:20: idle at "stand by - pump out" step without continuing the following processing step Message-ID: Problem has not re-occured since the system was reset last Tuesday. From dongrip at snf.stanford.edu Wed Jul 8 03:09:44 2009 From: dongrip at snf.stanford.edu (dongrip at snf.stanford.edu) Date: Wed, 8 Jul 2009 03:09:44 -0700 Subject: Problem stsetch SNF 2009-07-08 03:09:44: standby mode: pumping out Message-ID: Process stops at the beginning (in standby mode: pumping out), and i couldn't further the process. Thus, i unloaded my sample. From gyama at snf.stanford.edu Wed Jul 8 11:15:59 2009 From: gyama at snf.stanford.edu (gyama at snf.stanford.edu) Date: Wed, 8 Jul 2009 11:15:59 -0700 Subject: Shutdown stsetch SNF 2009-07-08 11:15:59: getting stuck in 1st pump Message-ID: From eenriquez at snf.stanford.edu Wed Jul 8 17:24:49 2009 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 8 Jul 2009 17:24:49 -0700 Subject: Shutdown stsetch SNF 2009-07-08 11:15:59: getting stuck in 1st pump Message-ID: Reset the system. The system partially lost communication with the process controller. Cycled many times with no problems. Ordering new battery backup batteries. From eenriquez at snf.stanford.edu Wed Jul 8 17:27:49 2009 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 8 Jul 2009 17:27:49 -0700 Subject: Comment stsetch SNF 2009-07-08 17:27:48: Update system lock-up Message-ID: System partially looses communication with the process controller. If this re-occurs, maintenance staff will need to reset the entire system in order to resynchronize communication. Will order new batteries for battery backup. From eenriquez at snf.stanford.edu Fri Jul 10 15:07:47 2009 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Fri, 10 Jul 2009 15:07:47 -0700 Subject: Comment stsetch SNF 2009-07-10 15:07:46: Update system lockup Message-ID: Replaced one of the two backup batteries. From mcvittie at snf.stanford.edu Tue Jul 14 10:37:24 2009 From: mcvittie at snf.stanford.edu (mcvittie at snf.stanford.edu) Date: Tue, 14 Jul 2009 10:37:24 -0700 Subject: Shutdown stsetch SNF 2009-07-14 10:37:24: Bad rf connector on STS1 Message-ID: The connector needs to be replaced. Jim From shott at stanford.edu Tue Jul 14 12:14:16 2009 From: shott at stanford.edu (John Shott) Date: Tue, 14 Jul 2009 12:14:16 -0700 Subject: Shutdown stsetch SNF 2009-07-14 10:37:24: Bad rf connector on STS1 In-Reply-To: <20090714173724.579741A0A16@smtp3.stanford.edu> References: <20090714173724.579741A0A16@smtp3.stanford.edu> Message-ID: <4A5CD908.7090505@stanford.edu> Jim and Elmer: Good news, the RF crimp connectors, crimping tool and extra RG213 cable arrived today. I'll leave the box near Elmer's desk and then we can figure the best place to leave these things permamently John From mcvittie at snf.stanford.edu Tue Jul 14 17:07:35 2009 From: mcvittie at snf.stanford.edu (mcvittie at snf.stanford.edu) Date: Tue, 14 Jul 2009 17:07:35 -0700 Subject: Shutdown stsetch SNF 2009-07-14 10:37:24: Bad rf connector on STS1 Message-ID: Replaced RF connector to the ICP source. Jim From bchui at snf.stanford.edu Thu Jul 23 17:22:10 2009 From: bchui at snf.stanford.edu (bchui at snf.stanford.edu) Date: Thu, 23 Jul 2009 17:22:10 -0700 Subject: Problem stsetch SNF 2009-07-23 17:22:10: Stuck in "pumping down" step Message-ID: Can't process wafer... system freezes in "pumping down" step as soon as I click "process." (Needs system reset or more major fix?) From eenriquez at snf.stanford.edu Fri Jul 24 10:09:14 2009 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Fri, 24 Jul 2009 10:09:14 -0700 Subject: Problem stsetch SNF 2009-07-23 17:22:10: Stuck in "pumping down" step Message-ID: Reset the system and cycled wafers. Waiting for new back-up battery. From eenriquez at snf.stanford.edu Mon Jul 27 08:01:51 2009 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 27 Jul 2009 08:01:51 -0700 Subject: Comment stsetch SNF 2009-07-08 17:27:48: Update system lock-up Message-ID: Archived