From eenriquez at snf.stanford.edu Mon Jun 9 11:09:26 2008 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 9 Jun 2008 11:09:26 -0700 Subject: Comment stsetch2 SNF 2008-06-09 11:09:26: Wet cleaned chamber Message-ID: Wet cleaned the chamber and ran a 30 minute O2 clean. From mislam at snf.stanford.edu Sat Jun 14 14:18:57 2008 From: mislam at snf.stanford.edu (mislam at snf.stanford.edu) Date: Sat, 14 Jun 2008 14:18:57 -0700 Subject: Problem stsetch2 SNF 2008-06-14 14:18:55: Fault: Coil generator software interlock Message-ID: Plasma won't start due to a active software interlock on coil generator From mdickey at snf.stanford.edu Mon Jun 16 06:22:31 2008 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Mon, 16 Jun 2008 06:22:31 -0700 Subject: Shutdown stsetch2 SNF 2008-06-16 06:22:30: Chiller Message-ID: Chiller for the Platten has shut off for low refridgerant From shott at snf.stanford.edu Mon Jun 16 13:53:34 2008 From: shott at snf.stanford.edu (shott at snf.stanford.edu) Date: Mon, 16 Jun 2008 13:53:34 -0700 Subject: Shutdown stsetch2 SNF 2008-06-16 06:22:30: Chiller Message-ID: Mike found that the chiller had shut down. After topping off with coolant and a bit of fussing around, we were able to get the chiller restarted and it is now chilling to the specified 0 degrees C. From cbaxter at snf.stanford.edu Mon Jun 16 20:34:00 2008 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Mon, 16 Jun 2008 20:34:00 -0700 Subject: Problem stsetch2 SNF 2008-06-14 14:18:55: Fault: Coil generator software interlock Message-ID: Reset system to clear the alarm