From vipin at snf.stanford.edu Fri Jul 1 05:57:08 2005 From: vipin at snf.stanford.edu (vipin at snf.stanford.edu) Date: Fri, 1 Jul 2005 05:57:08 -0700 Subject: Problem svgcoat SNF 2005-07-01 05:57:08: Problem Message-ID: EBR over From vilanova at snf.stanford.edu Fri Jul 1 07:19:29 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Fri, 1 Jul 2005 07:19:29 -0700 Subject: Problem svgcoat SNF 2005-06-30 16:57:41: SVGCoat1 not working well Message-ID: Refilled EBR Canister, cycled wafers ok to use. From vilanova at snf.stanford.edu Fri Jul 1 07:20:09 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Fri, 1 Jul 2005 07:20:09 -0700 Subject: Problem svgcoat SNF 2005-07-01 05:57:08: Problem Message-ID: Refilled EBR Canister , Cycled wafers ok to use. From uli at snf.stanford.edu Fri Jul 1 11:18:52 2005 From: uli at snf.stanford.edu (uli at snf.stanford.edu) Date: Fri, 1 Jul 2005 11:18:52 -0700 Subject: Problem svgcoat SNF 2005-07-01 11:17:54: HMDS station is not working Message-ID: From vilanova at snf.stanford.edu Fri Jul 1 14:50:21 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Fri, 1 Jul 2005 14:50:21 -0700 Subject: Problem svgcoat SNF 2005-07-01 11:17:54: HMDS station is not working Message-ID: Found the HMDS Controller Sensor Loose, Adjusted sensor, cycled wafers, ready to use. From barlian at snf.stanford.edu Fri Jul 1 17:14:03 2005 From: barlian at snf.stanford.edu (barlian at snf.stanford.edu) Date: Fri, 1 Jul 2005 17:14:03 -0700 Subject: Problem svgcoat SNF 2005-07-01 17:14:03: a wafer got stucked under the primer Message-ID: i have no idea how it got there... From lindaw at snf.stanford.edu Sun Jul 3 13:50:25 2005 From: lindaw at snf.stanford.edu (lindaw at snf.stanford.edu) Date: Sun, 3 Jul 2005 13:50:25 -0700 Subject: Comment svgcoat SNF 2005-07-03 13:50:23: don't see a wafer anywhere near the vapor Message-ID: don't see a wafer anywhere near the vapor prime unit. Someone must have figured out how to remove thewafer reported "stuck" yesterday. From ginel at snf.stanford.edu Mon Jul 4 16:46:56 2005 From: ginel at snf.stanford.edu (ginel at snf.stanford.edu) Date: Mon, 4 Jul 2005 16:46:56 -0700 Subject: Problem svgcoat SNF 2005-07-04 16:46:56: wafers not leaving send cassette Message-ID: From vilanova at snf.stanford.edu Tue Jul 5 08:33:34 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Tue, 5 Jul 2005 08:33:34 -0700 Subject: Problem svgcoat SNF 2005-07-01 17:14:03: a wafer got stucked under the primer Message-ID: User removed the wafer from hotplate forced the rail and hotplate cover , broke the rail motor , now users have to use YEs oven for HMDS Step and Use program 9 on system to bypass HMDS step. From vilanova at snf.stanford.edu Tue Jul 5 08:34:35 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Tue, 5 Jul 2005 08:34:35 -0700 Subject: Comment svgcoat SNF 2005-07-03 13:50:23: don't see a wafer anywhere near the vapor Message-ID: Read previous message. From vilanova at snf.stanford.edu Tue Jul 5 08:35:00 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Tue, 5 Jul 2005 08:35:00 -0700 Subject: Problem svgcoat SNF 2005-07-04 16:46:56: wafers not leaving send cassette Message-ID: read previous message. From vilanova at snf.stanford.edu Tue Jul 5 08:36:21 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Tue, 5 Jul 2005 08:36:21 -0700 Subject: Problem svgcoat SNF 2005-07-05 08:36:20: DO not use HMDS Step . Message-ID: DO NOT USE HMDS STEP , USE THE YES OVEN AND THEN SKIP THE HMDS USING PROGRAM # 9 , USER BROKE A MOTOR THAT MAKES THE RAIL GO UP AND DOWN. From ginel at snf.stanford.edu Tue Jul 5 16:07:07 2005 From: ginel at snf.stanford.edu (ginel at snf.stanford.edu) Date: Tue, 5 Jul 2005 16:07:07 -0700 Subject: Problem svgcoat SNF 2005-07-05 16:07:06: wafer transfer still not working correctly Message-ID: From vilanova at snf.stanford.edu Wed Jul 6 09:31:30 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Wed, 6 Jul 2005 09:31:30 -0700 Subject: Shutdown svgcoat SNF 2005-07-06 09:31:29: Maintenance work in progress... Message-ID: From vilanova at snf.stanford.edu Wed Jul 6 12:43:13 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Wed, 6 Jul 2005 12:43:13 -0700 Subject: Problem svgcoat SNF 2005-07-05 08:36:20: DO not use HMDS Step . Message-ID: Replaced broken Vapor prime Sensor & Stepper motor , Cycled wafers , ready to use. From vilanova at snf.stanford.edu Wed Jul 6 12:43:52 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Wed, 6 Jul 2005 12:43:52 -0700 Subject: Problem svgcoat SNF 2005-07-05 16:07:06: wafer transfer still not working correctly Message-ID: Replaced Broken Stepper motor and sensor, cycled wafers ok , ready to use. From vilanova at snf.stanford.edu Wed Jul 6 12:44:40 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Wed, 6 Jul 2005 12:44:40 -0700 Subject: Shutdown svgcoat SNF 2005-07-06 09:31:29: Maintenance work in progress... Message-ID: Work in progress completed , replaced broken HOt plate prime oven stepper motor and sensor , cycled wafers , ready to use. From lindaw at snf.stanford.edu Fri Jul 8 12:47:41 2005 From: lindaw at snf.stanford.edu (lindaw at snf.stanford.edu) Date: Fri, 8 Jul 2005 12:47:41 -0700 Subject: Problem svgcoat SNF 2005-07-08 12:47:40: thick resist dispense unit alarming during disp. Message-ID: display panel in test mode??? From vilanova at snf.stanford.edu Fri Jul 8 13:46:04 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Fri, 8 Jul 2005 13:46:04 -0700 Subject: Problem svgcoat SNF 2005-07-08 12:47:40: thick resist dispense unit alarming during disp. Message-ID: Thick Dispense alarm reseted , cycled wafers , ready to use. From martinez at snf.stanford.edu Mon Jul 11 08:51:30 2005 From: martinez at snf.stanford.edu (martinez at snf.stanford.edu) Date: Mon, 11 Jul 2005 08:51:30 -0700 Subject: Shutdown svgcoat SNF 2005-07-11 08:51:29: WPM Message-ID: From martinez at snf.stanford.edu Mon Jul 11 09:37:25 2005 From: martinez at snf.stanford.edu (martinez at snf.stanford.edu) Date: Mon, 11 Jul 2005 09:37:25 -0700 Subject: Shutdown svgcoat SNF 2005-07-11 08:51:29: WPM Message-ID: wpm done From jhpark9 at snf.stanford.edu Mon Jul 11 17:19:42 2005 From: jhpark9 at snf.stanford.edu (jhpark9 at snf.stanford.edu) Date: Mon, 11 Jul 2005 17:19:42 -0700 Subject: Problem svgcoat SNF 2005-07-11 17:19:41: transfer problem Message-ID: There is a transfer problem from the first stage to next. Please check it.. From martinez at snf.stanford.edu Tue Jul 12 09:38:12 2005 From: martinez at snf.stanford.edu (martinez at snf.stanford.edu) Date: Tue, 12 Jul 2005 09:38:12 -0700 Subject: Problem svgcoat SNF 2005-07-11 17:19:41: transfer problem Message-ID: found post hot plate turned off reset circuit breaker, cycled wafers in prog 1-7-1. ready for use From crichter at snf.stanford.edu Wed Jul 13 16:51:54 2005 From: crichter at snf.stanford.edu (crichter at snf.stanford.edu) Date: Wed, 13 Jul 2005 16:51:54 -0700 Subject: Problem svgcoat SNF 2005-07-13 16:51:53: First Cool Plate Not Sensing Wafers Message-ID: wafers just stop at the first cool plate From vilanova at snf.stanford.edu Thu Jul 14 07:22:44 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Thu, 14 Jul 2005 07:22:44 -0700 Subject: Problem svgcoat SNF 2005-07-13 16:51:53: First Cool Plate Not Sensing Wafers Message-ID: Cool Station didtn want to work because a user ran a dummy wafer upside down, Cleaned Excesive Amount of resist from Hotplate, Cycled wafers , ok to use. From bchui at snf.stanford.edu Fri Jul 15 00:44:41 2005 From: bchui at snf.stanford.edu (bchui at snf.stanford.edu) Date: Fri, 15 Jul 2005 00:44:41 -0700 Subject: Problem svgcoat SNF 2005-07-15 00:44:40: Primer chuck has resist on it Message-ID: From vilanova at snf.stanford.edu Fri Jul 15 07:07:50 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Fri, 15 Jul 2005 07:07:50 -0700 Subject: Problem svgcoat SNF 2005-07-15 00:44:40: Primer chuck has resist on it Message-ID: Cleaned resist from hotplate. ok to use. From iwjung at snf.stanford.edu Fri Jul 15 11:58:21 2005 From: iwjung at snf.stanford.edu (iwjung at snf.stanford.edu) Date: Fri, 15 Jul 2005 11:58:21 -0700 Subject: Problem svgcoat SNF 2005-07-15 11:58:20: prime Message-ID: prime coater does not work From vilanova at snf.stanford.edu Fri Jul 15 14:52:02 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Fri, 15 Jul 2005 14:52:02 -0700 Subject: Comment svgcoat SNF 2005-07-15 14:52:02: Bad Vacuum Switch Message-ID: There is a problem with the HMDS Vacuum Switch , I couldnt work on it anymore because it has been in use, so for now Skip HMDS program and Use the YEs oven , to skip the HMDS Use program 9 , everything else is ok tp use, I will continue working on it on MOnday . From bohuang at snf.stanford.edu Sat Jul 16 00:12:00 2005 From: bohuang at snf.stanford.edu (bohuang at snf.stanford.edu) Date: Sat, 16 Jul 2005 00:12:00 -0700 Subject: Comment svgcoat SNF 2005-07-16 00:12:00: Beep cannot be cleared Message-ID: I tried to use track 1 by skipping the prime step (program 9). However, it started to beep and I could not stop the beeping by pressing the "Clear" button. From cmfaulkn at snf.stanford.edu Sun Jul 17 15:10:53 2005 From: cmfaulkn at snf.stanford.edu (cmfaulkn at snf.stanford.edu) Date: Sun, 17 Jul 2005 15:10:53 -0700 Subject: Problem svgcoat SNF 2005-07-17 15:10:52: 3612 line dripping resist Message-ID: the line drips resist after the wafer has spun.... From vilanova at snf.stanford.edu Mon Jul 18 07:16:42 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Mon, 18 Jul 2005 07:16:42 -0700 Subject: Comment svgcoat SNF 2005-07-16 00:12:00: Beep cannot be cleared Message-ID: Cycled wafers Using Programas 7 and 4 no beep SOund, Also Adjusted 3612 Dispense. ok to use. From vilanova at snf.stanford.edu Mon Jul 18 07:17:02 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Mon, 18 Jul 2005 07:17:02 -0700 Subject: Problem svgcoat SNF 2005-07-17 15:10:52: 3612 line dripping resist Message-ID: Adjusted Resist Dispense hose. ok to use. From vilanova at snf.stanford.edu Mon Jul 18 11:03:24 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Mon, 18 Jul 2005 11:03:24 -0700 Subject: Comment svgcoat SNF 2005-07-18 11:03:23: Wrong Resist Bottle Message-ID: omeone Put the wrong resist bottle for dispense # 2 , Removed Wrong Bottle , purged line with acetone, Replaced wrong bottle with right one SPR220-7 !!! purged line , cycled wafers , ready to use. From vilanova at snf.stanford.edu Mon Jul 18 12:36:03 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Mon, 18 Jul 2005 12:36:03 -0700 Subject: Shutdown svgcoat SNF 2005-07-18 12:36:02: Work in progress............ Message-ID: From vilanova at snf.stanford.edu Mon Jul 18 14:08:20 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Mon, 18 Jul 2005 14:08:20 -0700 Subject: Problem svgcoat SNF 2005-07-15 11:58:20: prime Message-ID: Replaced bad vacuum Switch , calibrated system , ok to use. From vilanova at snf.stanford.edu Mon Jul 18 14:09:04 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Mon, 18 Jul 2005 14:09:04 -0700 Subject: Comment svgcoat SNF 2005-07-15 14:52:02: Bad Vacuum Switch Message-ID: Replaced broken Vacuum Switch , Calibrated system ready to use. From vilanova at snf.stanford.edu Mon Jul 18 14:09:19 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Mon, 18 Jul 2005 14:09:19 -0700 Subject: Comment svgcoat SNF 2005-07-18 11:03:23: Wrong Resist Bottle Message-ID: Cleared comment. From vilanova at snf.stanford.edu Mon Jul 18 14:09:49 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Mon, 18 Jul 2005 14:09:49 -0700 Subject: Shutdown svgcoat SNF 2005-07-18 12:36:02: Work in progress............ Message-ID: Work Completed , ready to use. From iwjung at snf.stanford.edu Tue Jul 19 11:40:25 2005 From: iwjung at snf.stanford.edu (iwjung at snf.stanford.edu) Date: Tue, 19 Jul 2005 11:40:25 -0700 Subject: Problem svgcoat SNF 2005-07-19 11:40:24: send indexer does not work Message-ID: From vilanova at snf.stanford.edu Tue Jul 19 13:27:55 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Tue, 19 Jul 2005 13:27:55 -0700 Subject: Problem svgcoat SNF 2005-07-19 11:40:24: send indexer does not work Message-ID: Send Indexer working Fine , Cycled 5 wafers , ok to use. From cmfaulkn at snf.stanford.edu Wed Jul 20 14:52:42 2005 From: cmfaulkn at snf.stanford.edu (cmfaulkn at snf.stanford.edu) Date: Wed, 20 Jul 2005 14:52:42 -0700 Subject: Problem svgcoat SNF 2005-07-20 14:52:42: 3612 dripping onto wafer after spin Message-ID: From martinez at snf.stanford.edu Wed Jul 20 15:46:44 2005 From: martinez at snf.stanford.edu (martinez at snf.stanford.edu) Date: Wed, 20 Jul 2005 15:46:44 -0700 Subject: Problem svgcoat SNF 2005-07-20 14:52:42: 3612 dripping onto wafer after spin Message-ID: purged air from resist line adj pump draw back cycled test wafers From jhpark9 at snf.stanford.edu Thu Jul 21 15:17:13 2005 From: jhpark9 at snf.stanford.edu (jhpark9 at snf.stanford.edu) Date: Thu, 21 Jul 2005 15:17:13 -0700 Subject: Problem svgcoat SNF 2005-07-21 15:17:12: spots on the coated wafer Message-ID: In the front track, there are lots of spots after coating 1 and 1.6um. When compared with the back track, it is so bad. From crichter at snf.stanford.edu Thu Jul 21 15:48:24 2005 From: crichter at snf.stanford.edu (crichter at snf.stanford.edu) Date: Thu, 21 Jul 2005 15:48:24 -0700 Subject: Problem svgcoat SNF 2005-07-21 15:48:20: spots found on resist (?) Message-ID: I think the EBR is spraying droplets into the wafer From martinez at snf.stanford.edu Thu Jul 21 16:26:03 2005 From: martinez at snf.stanford.edu (martinez at snf.stanford.edu) Date: Thu, 21 Jul 2005 16:26:03 -0700 Subject: Problem svgcoat SNF 2005-07-21 15:48:20: spots found on resist (?) Message-ID: adj ebr pressure, cycled test wafers From martinez at snf.stanford.edu Thu Jul 21 16:26:18 2005 From: martinez at snf.stanford.edu (martinez at snf.stanford.edu) Date: Thu, 21 Jul 2005 16:26:18 -0700 Subject: Problem svgcoat SNF 2005-07-21 15:17:12: spots on the coated wafer Message-ID: problem cleared From martinez at snf.stanford.edu Fri Jul 22 08:47:09 2005 From: martinez at snf.stanford.edu (martinez at snf.stanford.edu) Date: Fri, 22 Jul 2005 08:47:09 -0700 Subject: Shutdown svgcoat SNF 2005-07-22 08:47:04: spindle replacement Message-ID: From martinez at snf.stanford.edu Fri Jul 22 09:36:07 2005 From: martinez at snf.stanford.edu (martinez at snf.stanford.edu) Date: Fri, 22 Jul 2005 09:36:07 -0700 Subject: Shutdown svgcoat SNF 2005-07-22 08:47:04: spindle replacement Message-ID: replaced and calibrated spindle From crichter at snf.stanford.edu Fri Jul 22 18:15:31 2005 From: crichter at snf.stanford.edu (crichter at snf.stanford.edu) Date: Fri, 22 Jul 2005 18:15:31 -0700 Subject: Problem svgcoat SNF 2005-07-22 18:15:30: EBR spraying into the wafers again Message-ID: Using EBR on this track not recommeneded From mahnaz at snf.stanford.edu Mon Jul 25 09:53:50 2005 From: mahnaz at snf.stanford.edu (mahnaz at snf.stanford.edu) Date: Mon, 25 Jul 2005 09:53:50 -0700 Subject: Problem svgcoat SNF 2005-07-25 09:53:50: EBR is out Message-ID: Only run recipies without EBR. Looks pretty bad. Mario is getting the part for it. From mahnaz at snf.stanford.edu Mon Jul 25 10:14:27 2005 From: mahnaz at snf.stanford.edu (mahnaz at snf.stanford.edu) Date: Mon, 25 Jul 2005 10:14:27 -0700 Subject: Shutdown svgcoat SNF 2005-07-25 10:14:26: ran wafers WITHOUT EBR Message-ID: SIMILAR TO WITH EBR MANY PARTICLES ALL OVER THE WAFERS. From martinez at snf.stanford.edu Mon Jul 25 13:38:57 2005 From: martinez at snf.stanford.edu (martinez at snf.stanford.edu) Date: Mon, 25 Jul 2005 13:38:57 -0700 Subject: Shutdown svgcoat SNF 2005-07-25 10:14:26: ran wafers WITHOUT EBR Message-ID: puged 3612 line with acetone adj suck back, replaced ebr nozzle cleaned exhaust tube, cycled wafers From martinez at snf.stanford.edu Mon Jul 25 13:39:20 2005 From: martinez at snf.stanford.edu (martinez at snf.stanford.edu) Date: Mon, 25 Jul 2005 13:39:20 -0700 Subject: Problem svgcoat SNF 2005-07-25 09:53:50: EBR is out Message-ID: problem cleared From martinez at snf.stanford.edu Mon Jul 25 13:39:39 2005 From: martinez at snf.stanford.edu (martinez at snf.stanford.edu) Date: Mon, 25 Jul 2005 13:39:39 -0700 Subject: Problem svgcoat SNF 2005-07-22 18:15:30: EBR spraying into the wafers again Message-ID: problem cleared From me342d at snf.stanford.edu Tue Jul 26 03:55:34 2005 From: me342d at snf.stanford.edu (me342d at snf.stanford.edu) Date: Tue, 26 Jul 2005 03:55:34 -0700 Subject: Problem svgcoat SNF 2005-07-26 03:55:34: feeding cassette stuck in lowered position Message-ID: The feeding cassette is lowered to feed wafers into the track and does not come up From vilanova at snf.stanford.edu Tue Jul 26 07:26:28 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Tue, 26 Jul 2005 07:26:28 -0700 Subject: Problem svgcoat SNF 2005-07-26 03:55:34: feeding cassette stuck in lowered position Message-ID: Operator Error, System Indexers ( send and receive ) working Fine , ok to use. From uli at snf.stanford.edu Wed Jul 27 11:08:53 2005 From: uli at snf.stanford.edu (uli at snf.stanford.edu) Date: Wed, 27 Jul 2005 11:08:53 -0700 Subject: Problem svgcoat SNF 2005-07-27 11:08:52: extra resist drop Message-ID: During EBR, a extra resist drop ruins the uniformity of the resist. From martinez at snf.stanford.edu Wed Jul 27 13:35:59 2005 From: martinez at snf.stanford.edu (martinez at snf.stanford.edu) Date: Wed, 27 Jul 2005 13:35:59 -0700 Subject: Problem svgcoat SNF 2005-07-27 11:08:52: extra resist drop Message-ID: purged air from 3612 resist line cycled 5 wafers. ok now From mperez at snf.stanford.edu Thu Jul 28 11:09:34 2005 From: mperez at snf.stanford.edu (mperez at snf.stanford.edu) Date: Thu, 28 Jul 2005 11:09:34 -0700 Subject: Problem svgcoat SNF 2005-07-28 11:09:34: resist on hmds hotplate Message-ID: From vilanova at snf.stanford.edu Thu Jul 28 11:21:33 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Thu, 28 Jul 2005 11:21:33 -0700 Subject: Problem svgcoat SNF 2005-07-28 11:09:34: resist on hmds hotplate Message-ID: removed resiste from hotplate, cleaned hotplate , tested ok ready to use. From lindaw at snf.stanford.edu Thu Jul 28 13:34:12 2005 From: lindaw at snf.stanford.edu (lindaw at snf.stanford.edu) Date: Thu, 28 Jul 2005 13:34:12 -0700 Subject: Problem svgcoat SNF 2005-07-28 13:34:11: dispense 1 (3612) drips on wafer during spin Message-ID: and the thick resist (dispense 2) leaving a lot of particles. From vilanova at snf.stanford.edu Thu Jul 28 14:09:51 2005 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Thu, 28 Jul 2005 14:09:51 -0700 Subject: Problem svgcoat SNF 2005-07-28 13:34:11: dispense 1 (3612) drips on wafer during spin Message-ID: adjusted resist (3612) suck back , cycled wafers ok to use. From me342d at snf.stanford.edu Fri Jul 29 18:35:20 2005 From: me342d at snf.stanford.edu (me342d at snf.stanford.edu) Date: Fri, 29 Jul 2005 18:35:20 -0700 Subject: Comment svgcoat SNF 2005-07-29 18:35:19: Feeder on svgcoat track 1 Message-ID: Feeder cassette does not go down. Manual mode still works From me342d at snf.stanford.edu Fri Jul 29 18:35:53 2005 From: me342d at snf.stanford.edu (me342d at snf.stanford.edu) Date: Fri, 29 Jul 2005 18:35:53 -0700 Subject: Problem svgcoat SNF 2005-07-29 18:35:52: Feeder on svgcoat1 does not go down Message-ID: manual mode still works