From yyao at snf.stanford.edu Wed Apr 3 12:23:45 2002 From: yyao at snf.stanford.edu (Yahong Yao) Date: Wed, 03 Apr 2002 12:23:45 -0800 Subject: clean the hot plate Message-ID: <3CAB64D1.F79D731F@snf.stanford.edu> Dear Users, I propose that whenever we coat 7 micro PR without EBR, we'd better clean the prebake hotplate with acetone after we are done. It is not a good idea to leave it to the next user. Sincerely, Yahong Yao From mahnaz at snf.stanford.edu Thu Apr 4 08:46:10 2002 From: mahnaz at snf.stanford.edu (Mahnaz) Date: Thu, 04 Apr 2002 08:46:10 -0800 Subject: clean the hot plate References: <3CAB64D1.F79D731F@snf.stanford.edu> Message-ID: <3CAC8352.34FADE8C@snf.stanford.edu> Hello all, This is a very good idea, soak the wipe with acetone and clean the hot plate. DO NOT SQUIRT THE ACETONE ON THE HOT PLATE , YOU WILL DAMAGE THE SYSTEM mahnaz Yahong Yao wrote: > Dear Users, > > I propose that whenever we coat 7 micro PR without EBR, we'd better > clean the prebake hotplate with acetone after we are done. It is not a > good idea to leave it to the next user. > > Sincerely, > Yahong Yao From pindermuhle at zyomyx.com Thu Apr 4 09:45:25 2002 From: pindermuhle at zyomyx.com (Indermuhle, Pierre) Date: Thu, 4 Apr 2002 09:45:25 -0800 Subject: clean the hot plate Message-ID: ...but don't forget to cool down the hot plate before!! I think that acetone auto-ignite around 60 deg C... -----Original Message----- From: Mahnaz [mailto:mahnaz at snf.stanford.edu] Sent: Thursday, April 04, 2002 8:46 AM To: Yahong Yao; svgcoat at snf.stanford.edu Subject: Re: clean the hot plate Hello all, This is a very good idea, soak the wipe with acetone and clean the hot plate. DO NOT SQUIRT THE ACETONE ON THE HOT PLATE , YOU WILL DAMAGE THE SYSTEM mahnaz Yahong Yao wrote: > Dear Users, > > I propose that whenever we coat 7 micro PR without EBR, we'd better > clean the prebake hotplate with acetone after we are done. It is not a > good idea to leave it to the next user. > > Sincerely, > Yahong Yao From mahnaz at snf.stanford.edu Thu Apr 18 10:28:18 2002 From: mahnaz at snf.stanford.edu (Mahnaz) Date: Thu, 18 Apr 2002 10:28:18 -0700 Subject: down time Message-ID: <3CBF0232.B192E9B5@snf.stanford.edu> Hello all, Sorry for the short notice, The SVG coat Track 1 will be down tomorrow morning 4/19 from 7 in the morning for a half a day to replace the dispense arm's Motor, sensor and the air cylinder and the the spindle to hopefully take care of all the little issues we had with the EBR . It will be nice to give Mike and Mario the room to do all of that, as soon as the track comes up I will send out an Email. Thanks in advance mahnaz From mahnaz at snf.stanford.edu Thu Apr 25 09:04:26 2002 From: mahnaz at snf.stanford.edu (Mahnaz) Date: Thu, 25 Apr 2002 09:04:26 -0700 Subject: Track shut down Message-ID: <3CC8290A.FB833ABF@snf.stanford.edu> Hello all, We need to shut both SVG track down on May 3rd from 8 in the morning. UTS will change the sensor and look in to few little details on that day. We anticipate the work will take about 8 hours or that is what I hope for. I will send out an email as soon as we are done and the track is up. I will appreciate if you do not ask the UTS people for when the track will be up, forward your questions to Mike, Mario and I. Please plan accordingly. mahnaz -------------- next part -------------- An HTML attachment was scrubbed... URL: