From grahamab at snf.stanford.edu Sun Oct 2 18:48:28 2011 From: grahamab at snf.stanford.edu (grahamab at snf.stanford.edu) Date: Sun, 2 Oct 2011 18:48:28 -0700 Subject: Problem svgcoat2 SNF 2011-10-02 18:48:28: vapor prime lid occasionally dropping Message-ID: track alarmed while trying to send the wafer because the vapor prime lid had tilted free and was blocking the track from closing. after lifting it everything ran fine. it looks like the spacer bar on the lid is popping up and allowing it to hinge freely. I tried pushing it back down, but it did it again a few wafers later. seems to work fine once fixing it. From vilanova at snf.stanford.edu Mon Oct 3 07:58:18 2011 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Mon, 3 Oct 2011 07:58:18 -0700 Subject: Problem svgcoat2 SNF 2011-10-02 18:48:28: vapor prime lid occasionally dropping Message-ID: Couple Of the Lid Screws Were Lose, Adjusted Screws And Run All Dummy wafers, All Operations Are Ok, Ready to use., From vilanova at snf.stanford.edu Wed Oct 5 08:31:28 2011 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Wed, 5 Oct 2011 08:31:28 -0700 Subject: Comment svgcoat2 SNF 2011-10-05 08:31:28: Found Dummy dirty contaminated wafer In Catch cup Bowl!!! Message-ID: During my daily clean up rounds I found a dirty dummy wafer inside the catch cup, dont know what or why was there I dont see any problems reports. Removed the wafer and tested system , all operations Ok ready to use From lupin000 at snf.stanford.edu Thu Oct 6 03:29:45 2011 From: lupin000 at snf.stanford.edu (lupin000 at snf.stanford.edu) Date: Thu, 6 Oct 2011 03:29:45 -0700 Subject: Problem svgcoat2 SNF 2011-10-06 03:29:44: Transport problem Message-ID: svgcoat2 has a transportation problem. I could notice that the conveyer belt did not move after baking process. I think it needs to be fixed. From vilanova at snf.stanford.edu Thu Oct 6 07:57:23 2011 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Thu, 6 Oct 2011 07:57:23 -0700 Subject: Problem svgcoat2 SNF 2011-10-06 03:29:44: Transport problem Message-ID: Found The system With all the " transfer stop" Lights ON maybe the wafers were PIcked up before they reached the receiving cassette, I Pressed "TRACK RESET" and Cycled all the dummy wafers, All operations Are Ok , Cleaned dummy wafers , Ok to use. From vilanova at snf.stanford.edu Tue Oct 11 08:15:06 2011 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Tue, 11 Oct 2011 08:15:06 -0700 Subject: Comment svgcoat2 SNF 2011-10-11 08:15:06: Found The system Powered Off. Message-ID: FOund the system POwered Off For apparently NO Reason, POwer Back On And Ran Dummy wafers and cleaned system ,. All Operations Ok, Good To use. From vilanova at snf.stanford.edu Mon Oct 17 09:29:28 2011 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Mon, 17 Oct 2011 09:29:28 -0700 Subject: Comment svgcoat2 SNF 2011-10-17 09:29:27: cleaned up dummy wafers catch cup belts, hotplate and cool station, Cycled all dummies , All operations ok, Good to use. Message-ID: cleaned up dummy wafers catch cup belts, hotplate and cool station, Cycled all dummies , All operations ok, Good to use. From ehe at snf.stanford.edu Wed Oct 19 14:08:40 2011 From: ehe at snf.stanford.edu (ehe at snf.stanford.edu) Date: Wed, 19 Oct 2011 14:08:40 -0700 Subject: Problem svgcoat2 SNF 2011-10-19 14:08:39: track vacuum break error message Message-ID: From ehe at snf.stanford.edu Wed Oct 19 14:20:53 2011 From: ehe at snf.stanford.edu (ehe at snf.stanford.edu) Date: Wed, 19 Oct 2011 14:20:53 -0700 Subject: Shutdown svgcoat2 SNF 2011-10-19 14:20:53: not working, not sending, track vacuum break Message-ID: From vilanova at snf.stanford.edu Wed Oct 19 14:59:59 2011 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Wed, 19 Oct 2011 14:59:59 -0700 Subject: Shutdown svgcoat2 SNF 2011-10-19 14:20:53: not working, not sending, track vacuum break Message-ID: Computer Froze, Re Initialized Cumputer and cycled wafers, Ran Recipe # 7 , Everything Ok, all Operations ok, Ready to use. From vilanova at snf.stanford.edu Wed Oct 19 15:00:37 2011 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Wed, 19 Oct 2011 15:00:37 -0700 Subject: Problem svgcoat2 SNF 2011-10-19 14:08:39: track vacuum break error message Message-ID: Re initialized Computer and cycled wafers, All Operations Ok ready To use, From xzhuan1 at snf.stanford.edu Sun Oct 23 16:41:29 2011 From: xzhuan1 at snf.stanford.edu (xzhuan1 at snf.stanford.edu) Date: Sun, 23 Oct 2011 16:41:29 -0700 Subject: Problem svgcoat2 SNF 2011-10-23 16:41:29: primer track rails stuck Message-ID: From vilanova at snf.stanford.edu Mon Oct 24 07:55:06 2011 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Mon, 24 Oct 2011 07:55:06 -0700 Subject: Problem svgcoat2 SNF 2011-10-23 16:41:29: primer track rails stuck Message-ID: Re Initialized Track, Tested Prime and rest of Operations are Ok, Good To use. From vilanova at snf.stanford.edu Mon Oct 24 08:06:06 2011 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Mon, 24 Oct 2011 08:06:06 -0700 Subject: Comment svgcoat2 SNF 2011-10-24 08:06:06: cleaned stations , Hotplate chuck belts Message-ID: Cleaned stations Hotplate chuck and Belts, Cleaned dummy wafers, Ok to use.