From mahnaz at snf.stanford.edu Thu Sep 12 14:10:37 2002 From: mahnaz at snf.stanford.edu (Mahnaz) Date: Thu, 12 Sep 2002 14:10:37 -0700 Subject: unacceptable Message-ID: <3D8102CD.E35036D9@snf.stanford.edu> Hello all, I have few complain to make: On the YES oven: I found one cassette loaded with si dust or something similar The second cassette missing, I looked in to all the teflon cassette and is not there. These cassettes have two brown dot and you are not allowed to remove them from yes oven. Bring it back ASAP. On the SVG coater I created the ARM 7 (5mm) to replace the ARM 6 ( the standard, 2.5 mm) and that is all you need to do . In the recipe where it says arm, 6: to change, press 7 and push arm. You are not allowed to go to ARM program and change things. You are not allowed to adjust( push back and forth the arm ) that causes many damage to the equipment. See Mike or Mario if you need help. Two people works was effected. This cycle has to come to end or I simply will take the KEYS away mahnaz -------------- next part -------------- An HTML attachment was scrubbed... URL: