From vilanova at snf.stanford.edu  Mon Feb  1 07:52:27 2010
From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu)
Date: Mon, 1 Feb 2010 07:52:27 -0800
Subject: Problem svgdev SNF 2010-01-31 23:11:07: Manual mode only
Message-ID: <mailman.759.1357938757.25901.svgdev-pcs@snf.stanford.edu>

canister was out o fdeveloper, and THERE WAS NO MORE 
DEVELOPER IN THE YELLOW CABINET!!!! I asked Gary to get me more
Developer refiled canister, cycled wafers, system ok to use. 



From zpatel at snf.stanford.edu  Tue Feb  9 16:13:41 2010
From: zpatel at snf.stanford.edu (zpatel at snf.stanford.edu)
Date: Tue, 9 Feb 2010 16:13:41 -0800
Subject: Comment svgdev SNF 2010-02-09 16:13:41: Program 9-2 did not start 
Message-ID: <mailman.760.1357938757.25901.svgdev-pcs@snf.stanford.edu>

None of the wafer cassette started moving .
Loaded and unloaded wafer cassette twice



From calarrudo at snf.stanford.edu  Tue Feb  9 17:04:35 2010
From: calarrudo at snf.stanford.edu (calarrudo at snf.stanford.edu)
Date: Tue, 9 Feb 2010 17:04:35 -0800
Subject: Problem svgdev SNF 2010-02-09 17:04:34: Track 1
Message-ID: <mailman.761.1357938757.25901.svgdev-pcs@snf.stanford.edu>

Track 1 belt came loose.



From vilanova at snf.stanford.edu  Wed Feb 10 08:13:31 2010
From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu)
Date: Wed, 10 Feb 2010 08:13:31 -0800
Subject: Problem svgdev SNF 2010-02-09 17:04:34: Track 1
Message-ID: <mailman.762.1357938757.25901.svgdev-pcs@snf.stanford.edu>

Replaced Defective Belt and Adjusted Belt Pulley. tested,
Ok to use. 



From vilanova at snf.stanford.edu  Wed Feb 10 08:13:40 2010
From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu)
Date: Wed, 10 Feb 2010 08:13:40 -0800
Subject: Comment svgdev SNF 2010-02-09 16:13:41: Program 9-2 did not start 
Message-ID: <mailman.763.1357938757.25901.svgdev-pcs@snf.stanford.edu>

Replaced Defective Belt and Adjusted Belt Pulley. tested,
Ok to use. 



From jwpchen at snf.stanford.edu  Tue Feb 16 19:09:46 2010
From: jwpchen at snf.stanford.edu (jwpchen at snf.stanford.edu)
Date: Tue, 16 Feb 2010 19:09:46 -0800
Subject: Comment svgdev SNF 2010-02-16 19:09:45: wafers off center
Message-ID: <mailman.764.1357938757.25901.svgdev-pcs@snf.stanford.edu>

wafers are more noticeably off center when placed on spindle, no need to squint to see the wobble



From vilanova at snf.stanford.edu  Wed Feb 17 08:21:21 2010
From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu)
Date: Wed, 17 Feb 2010 08:21:21 -0800
Subject: Comment svgdev SNF 2010-02-16 19:09:45: wafers off center
Message-ID: <mailman.765.1357938757.25901.svgdev-pcs@snf.stanford.edu>

cycled wafers and I couldnt repeat the problem , ok to use.