From xuanwu at snf.stanford.edu Thu Sep 2 00:00:52 2010 From: xuanwu at snf.stanford.edu (xuanwu at snf.stanford.edu) Date: Thu, 2 Sep 2010 00:00:52 -0700 Subject: Comment svgdev SNF 2010-09-02 00:00:51: Receiver Cassette no longer misaligned Message-ID: Receiver cassette slots don't get skipped anymore... looks like the problem got fixed. From gsosa at snf.stanford.edu Thu Sep 2 06:53:07 2010 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Thu, 2 Sep 2010 06:53:07 -0700 Subject: Comment svgdev SNF 2010-08-31 01:15:59: Receiver Cassette Miscalibration Message-ID: Removed the comb assembly and inspected. Found some residue on comp. Cleaned comb and slot sensors. Re-assembled and tested. Indexer does not skip slot 4 anymore. Indexer OK now From gsosa at snf.stanford.edu Thu Sep 2 06:53:15 2010 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Thu, 2 Sep 2010 06:53:15 -0700 Subject: Comment svgdev SNF 2010-09-02 00:00:51: Receiver Cassette no longer misaligned Message-ID: Removed the comb assembly and inspected. Found some residue on comp. Cleaned comb and slot sensors. Re-assembled and tested. Indexer does not skip slot 4 anymore. Indexer OK now From gsosa at snf.stanford.edu Wed Sep 29 15:19:30 2010 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Wed, 29 Sep 2010 15:19:30 -0700 Subject: Comment svgdev SNF 2010-09-29 15:19:30: Hotplate Temperature Verification 09/29 Message-ID: Verified hotplate temperatures on both developer tracks with the following results: Target temperature set at 110 Deg. C. Measured Temperature- Developer #2(Front): 110.2 Deg C. Uniformity: 0.23% Developer #1(Back): 109.9 Deg C. Uniformity: 0.23% Used a thermocouple wafer to measure the target temperature at the center of the hotplate. Used a surface contact thermometer to measure the hotplate uniformity . Both hotplates are within <.5 degrees of setpoint and within .3 degrees of each-other.