From shott at snf.stanford.edu  Tue Nov  2 13:18:48 2004
From: shott at snf.stanford.edu (John Shott)
Date: Tue, 02 Nov 2004 13:18:48 -0800
Subject: Coral enabling problems ...
Message-ID: <4187F9B8.7060407@snf.stanford.edu>

SNF Lab Members:

I'm aware that there are currently enabling problems both svgdev and 
evalign.  In each case, it is behaving as if there is an opencircuit in 
the enabling chain.  Because I know that there is a lot of demand for 
these tools, I've temporarily modified the database so that they won't 
make use of the interlocks.  However, to complete this workaround, 
either Mike or Mario will have to use the manual interlock box to turn 
these things on.  I'd do it myself but am involved in a conference call 
for the next hour.

If they can do this part, this should get you off the ground until we 
have a chance to figure out whether a component has failed or a wire is 
open or what.

PLEASE BE CAREFUL: at the moment: you can actually enable it on Coral 
now ... but because the interlock doesn't close the relay, the 
instrument won't work so please don't try this until Mario or Mike can 
use the manual override box.

Thanks,

John