From ericp at snf.stanford.edu Fri Aug 15 01:06:10 2003 From: ericp at snf.stanford.edu (ericp at snf.stanford.edu) Date: Aug 15, 2003 1:06:10 PM Subject: Problem svgdev2 2003-08-15 13:06:10: svgdev2- minor bearing problem Message-ID: On SVGDEV2, on the bake track, the final roller toward the front (operator side) of the machine, the bearing seems to be getting awefully loose. You can wiggle it around quite a bit. It still works fine, but I think we should order one. From ericp at snf.stanford.edu Fri Aug 15 01:09:03 2003 From: ericp at snf.stanford.edu (ericp at snf.stanford.edu) Date: Aug 15, 2003 1:09:03 PM Subject: Problem svgdev2 2003-08-15 13:09:03: svgdev2- update Message-ID: Update- It appears that it's not a faulty bearing, but the pin that the bearing rides on is not all the way in. It just needs to be pressed all the way in. From martinez at snf.stanford.edu Fri Aug 15 01:31:55 2003 From: martinez at snf.stanford.edu (martinez at snf.stanford.edu) Date: Aug 15, 2003 1:31:55 PM Subject: Problem svgdev2 2003-08-15 13:09:03: Report Clear for svgdev2 Message-ID: no problem found From martinez at snf.stanford.edu Fri Aug 15 01:33:00 2003 From: martinez at snf.stanford.edu (martinez at snf.stanford.edu) Date: Aug 15, 2003 1:33:00 PM Subject: Problem svgdev2 2003-08-15 13:06:10: Report Clear for svgdev2 Message-ID: cycled wafers bearing is intact and working fine hey eric get a life willya !!! From xiangli at snf.stanford.edu Sun Aug 24 11:37:30 2003 From: xiangli at snf.stanford.edu (xiangli at snf.stanford.edu) Date: Aug 24, 2003 11:37:30 AM Subject: Problem svgdev2 2003-08-24 11:37:29: A wafer was broken in the dev. Message-ID: The developer still works. From vilanova at snf.stanford.edu Mon Aug 25 07:46:30 2003 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Aug 25, 2003 7:46:30 AM Subject: Problem svgdev2 2003-08-24 11:37:29: Report Clear for svgdev2 Message-ID: removed broken wafer, cleaned catch cup, tested ok ready to use.