From gthareja at stanford.edu Sun Oct 25 07:45:20 2009 From: gthareja at stanford.edu (Gaurav Thareja) Date: Sun, 25 Oct 2009 07:45:20 -0700 (PDT) Subject: Must Read - new instructions for TEL-SPA usage. In-Reply-To: <1795824225.6234831256440634096.JavaMail.root@zm06.stanford.edu> Message-ID: <926176252.6263631256481920323.JavaMail.root@zm06.stanford.edu> Many thanks to the TEL team, Ted Berg and Peter Griffin for solving the heater problem. For future use - - Stage heater is fixed at 500C Setting temperature. - MW heater is always ON. - If we should experience another power failure the bring up procedure for stage heater should be, bring it to 100 C check for proper operation, then ramp slowly in 25 degree increments until it reaches idle temp which is 500 C. From jrjain at stanford.edu Thu Oct 29 21:33:04 2009 From: jrjain at stanford.edu (Raja Jain) Date: Thu, 29 Oct 2009 21:33:04 -0700 Subject: Tomorrow's tel reservation cleared Message-ID: <006501ca591a$124a6e50$36df4af0$@edu> Due to upstream equipment failure (epi2) Raja Jain PhD Candidate Stanford University, Department of Electrical Engineering Allen Center for Integrated Systems 420 Via Palou Stanford, CA 94305 (650) 248-0770 -------------- next part -------------- An HTML attachment was scrubbed... URL: