From mtang at snf.stanford.edu Mon Jul 2 09:18:50 2007 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Mon, 2 Jul 2007 09:18:50 -0700 Subject: Comment teos2 SNF 2007-06-18 13:12:11: TEOS Flow Message-ID: See standing problem. From mtang at snf.stanford.edu Mon Jul 2 09:21:28 2007 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Mon, 2 Jul 2007 09:21:28 -0700 Subject: Problem teos2 SNF 2007-06-29 20:53:59: No deposition Message-ID: See Maurice's previous problem entry. The MFC has an intermittent problem which requires frequent resetting. It can be used if monitored carefully. A replacement is on order. In the meantime, if you want to use it, make sure to contact Maurice or Ted about helping to monitor the system to ensure deposition does take place. From maurice at snf.stanford.edu Wed Jul 11 11:08:36 2007 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 11 Jul 2007 11:08:36 -0700 Subject: Comment teos2 SNF 2007-07-11 11:08:36: reset TEOS mfc Message-ID: unplugged/plugged Teos mfc during kimsora deposition From panjun at snf.stanford.edu Thu Jul 12 16:25:11 2007 From: panjun at snf.stanford.edu (panjun at snf.stanford.edu) Date: Thu, 12 Jul 2007 16:25:11 -0700 Subject: Problem teos2 SNF 2007-07-12 16:25:11: pressure 1769.0 after 30min Message-ID: pressure cllimb up to 1769.0 after 30min deposition at step 70. From tberg at snf.stanford.edu Fri Jul 13 10:33:13 2007 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 13 Jul 2007 10:33:13 -0700 Subject: Shutdown teos2 SNF 2007-07-13 10:33:13: Trap clean Message-ID: From mdickey at snf.stanford.edu Mon Jul 16 09:36:06 2007 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Mon, 16 Jul 2007 09:36:06 -0700 Subject: Shutdown teos2 SNF 2007-07-13 10:33:13: Trap clean Message-ID: System is heating up..will verify haot leak check and return for use From mdickey at snf.stanford.edu Mon Jul 16 14:17:59 2007 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Mon, 16 Jul 2007 14:17:59 -0700 Subject: Shutdown teos2 SNF 2007-07-16 14:17:58: leak Message-ID: Down for leak From mdickey at snf.stanford.edu Tue Jul 17 12:22:55 2007 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Tue, 17 Jul 2007 12:22:55 -0700 Subject: Shutdown teos2 SNF 2007-07-16 14:17:58: leak Message-ID: system is back and ready for use. We need to address O ring issues on the trap for lower rate of rise. From mdickey at snf.stanford.edu Tue Jul 17 12:23:16 2007 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Tue, 17 Jul 2007 12:23:16 -0700 Subject: Problem teos2 SNF 2007-07-12 16:25:11: pressure 1769.0 after 30min Message-ID: trap cleaned and pressure is back lower From mdickey at snf.stanford.edu Tue Jul 24 06:52:10 2007 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Tue, 24 Jul 2007 06:52:10 -0700 Subject: Shutdown teos2 SNF 2007-07-24 06:52:10: leak Message-ID: Investigating possible leak From maurice at snf.stanford.edu Wed Jul 25 13:43:37 2007 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 25 Jul 2007 13:43:37 -0700 Subject: Shutdown teos2 SNF 2007-07-24 06:52:10: leak Message-ID: Replaced "o" ring in Dryscrub. Manually ran a base and rate...ok Ran Teos program...ok back to yellow From maurice at snf.stanford.edu Wed Jul 25 17:03:39 2007 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 25 Jul 2007 17:03:39 -0700 Subject: Comment teos2 SNF 2007-07-11 11:08:36: reset TEOS mfc Message-ID: logged from 7/11