From maurice at snf.stanford.edu Tue Sep 4 13:36:08 2007 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Tue, 4 Sep 2007 13:36:08 -0700 Subject: Comment thermco1 SNF 2007-08-01 11:15:41: TLC clean Message-ID: logged From rostam at snf.stanford.edu Wed Sep 5 13:46:48 2007 From: rostam at snf.stanford.edu (rostam at snf.stanford.edu) Date: Wed, 5 Sep 2007 13:46:48 -0700 Subject: Problem thermco1 SNF 2007-09-05 13:46:48: alarm 58 & 31 Message-ID: I ran 1tlcclea on thermco1. alarm 58 and 31 occurred. N2 was off N2=2.36 (set point=2.50). temperatures of three zones were off by a few degrees. From rostam at snf.stanford.edu Wed Sep 5 13:48:47 2007 From: rostam at snf.stanford.edu (rostam at snf.stanford.edu) Date: Wed, 5 Sep 2007 13:48:47 -0700 Subject: Problem thermco1 SNF 2007-09-05 13:48:44: alarm 58 and 31 Message-ID: I ran 1tlcclea on thermco1. alarm 58 and 31 occured. n2 was off: n2=2.36 (set point=2.50) three zone temperatures were off by a few degrees. From rissman at snf.stanford.edu Tue Sep 25 09:13:27 2007 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Tue, 25 Sep 2007 09:13:27 -0700 Subject: Problem thermco1 SNF 2007-09-05 13:46:48: alarm 58 & 31 Message-ID: Problem has not been seen after multiple runs. From rissman at snf.stanford.edu Tue Sep 25 09:13:36 2007 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Tue, 25 Sep 2007 09:13:36 -0700 Subject: Problem thermco1 SNF 2007-09-05 13:48:44: alarm 58 and 31 Message-ID: Problem has not been seen after multiple runs. From rissman at snf.stanford.edu Tue Sep 25 09:13:54 2007 From: rissman at snf.stanford.edu (rissman at snf.stanford.edu) Date: Tue, 25 Sep 2007 09:13:54 -0700 Subject: Comment thermco1 SNF 2007-08-31 16:46:00: Temp stabilization Message-ID: Problem has not been seen after multiple runs. From king at snf.stanford.edu Sat Sep 29 23:57:45 2007 From: king at snf.stanford.edu (king at snf.stanford.edu) Date: Sat, 29 Sep 2007 23:57:45 -0700 Subject: Problem thermco1 SNF 2007-09-29 23:57:44: Need that backup wand for the Thermco bank Message-ID: Can we please have the backup wand installed for the four Thermcos? One is not enough. They chip, get dirty and come loose in the burning heat of Thermco1. You don't want the bank to be shut down because of a silly wand.