From xzhuan1 at snf.stanford.edu Mon Apr 10 19:32:33 2006 From: xzhuan1 at snf.stanford.edu (xzhuan1 at snf.stanford.edu) Date: Mon, 10 Apr 2006 19:32:33 -0700 Subject: Problem thermco2 SNF 2006-04-10 19:32:33: boat stalls Message-ID: boat got stuck half-way while pulling out. a piece of clean room wiper accidentally fell into the track and stalled the boat. I removed the clean room wiper but after that the boat would always stall in the middle of pulling in and out and alerm would set off. From maurice at snf.stanford.edu Wed Apr 12 10:38:25 2006 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 12 Apr 2006 10:38:25 -0700 Subject: Problem thermco2 SNF 2006-04-10 19:32:33: boat stalls Message-ID: wipe got stuck...it was removed...system seems ok I started a program to open an d close the furnace several times and had no problem (after remembering to enable the tube). From sanli at snf.stanford.edu Mon Apr 17 17:05:46 2006 From: sanli at snf.stanford.edu (sanli at snf.stanford.edu) Date: Mon, 17 Apr 2006 17:05:46 -0700 Subject: Problem thermco2 SNF 2006-04-17 17:05:45: thermco2 is alarming Message-ID: It started as soon as I disabled it.