From haniff at snf.stanford.edu Wed May 2 08:33:01 2007 From: haniff at snf.stanford.edu (haniff at snf.stanford.edu) Date: Wed, 2 May 2007 08:33:01 -0700 Subject: Problem thermco2 SNF 2007-05-02 08:33:01: tube will not go back in Message-ID: From haniff at snf.stanford.edu Fri May 4 08:00:51 2007 From: haniff at snf.stanford.edu (haniff at snf.stanford.edu) Date: Fri, 4 May 2007 08:00:51 -0700 Subject: Problem thermco2 SNF 2007-05-04 08:00:51: Process running-alrming Message-ID: I loaded an oxidation run this morning. The tube loaded fine but keeps alarming. The clock is not counting down. I am not sure if my process is running or not. From maurice at snf.stanford.edu Wed May 9 10:41:26 2007 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 9 May 2007 10:41:26 -0700 Subject: Problem thermco2 SNF 2007-05-02 08:33:01: tube will not go back in Message-ID: training issue? From shwong at snf.stanford.edu Fri May 11 13:43:21 2007 From: shwong at snf.stanford.edu (shwong at snf.stanford.edu) Date: Fri, 11 May 2007 13:43:21 -0700 Subject: Problem thermco2 SNF 2007-05-11 13:43:17: vacuum wand is loose/broken Message-ID: From shwong at snf.stanford.edu Fri May 11 13:43:30 2007 From: shwong at snf.stanford.edu (shwong at snf.stanford.edu) Date: Fri, 11 May 2007 13:43:30 -0700 Subject: Problem thermco2 SNF 2007-05-11 13:43:26: keeps alarming constantly Message-ID: From mdickey at snf.stanford.edu Fri May 11 13:59:50 2007 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Fri, 11 May 2007 13:59:50 -0700 Subject: Problem thermco2 SNF 2007-05-11 13:43:17: vacuum wand is loose/broken Message-ID: tip replaced From maurice at snf.stanford.edu Mon May 14 09:50:27 2007 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Mon, 14 May 2007 09:50:27 -0700 Subject: Problem thermco2 SNF 2007-05-04 08:00:51: Process running-alrming Message-ID: Training Issue From maurice at snf.stanford.edu Mon May 14 10:02:05 2007 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Mon, 14 May 2007 10:02:05 -0700 Subject: Problem thermco2 SNF 2007-05-11 13:43:26: keeps alarming constantly Message-ID: Please load "STANDBY2" program after your run is complete on Thermco2. This should stop the alarming while the tube is not being used. There is also a "STANDBY1" program recipe for Thermco1. Please load it Thermco1 after your run is complete. The operating instructions will be changed to include this addition. From maurice at snf.stanford.edu Mon May 14 10:02:10 2007 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Mon, 14 May 2007 10:02:10 -0700 Subject: Problem thermco2 SNF 2007-04-29 13:05:38: alarms constantly Message-ID: Please load "STANDBY2" program after your run is complete on Thermco2. This should stop the alarming while the tube is not being used. There is also a "STANDBY1" program recipe for Thermco1. Please load it Thermco1 after your run is complete. The operating instructions will be changed to include this addition. From maurice at snf.stanford.edu Mon May 14 10:02:15 2007 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Mon, 14 May 2007 10:02:15 -0700 Subject: Problem thermco2 SNF 2007-04-28 15:19:47: alarming continuously Message-ID: Please load "STANDBY2" program after your run is complete on Thermco2. This should stop the alarming while the tube is not being used. There is also a "STANDBY1" program recipe for Thermco1. Please load it Thermco1 after your run is complete. The operating instructions will be changed to include this addition. From mislam at snf.stanford.edu Thu May 17 13:05:33 2007 From: mislam at snf.stanford.edu (mislam at snf.stanford.edu) Date: Thu, 17 May 2007 13:05:33 -0700 Subject: Problem thermco2 SNF 2007-05-17 13:05:32: Vacuum wand tip missing Message-ID: From mdickey at snf.stanford.edu Thu May 17 13:26:11 2007 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Thu, 17 May 2007 13:26:11 -0700 Subject: Problem thermco2 SNF 2007-05-17 13:05:32: Vacuum wand tip missing Message-ID: Tip replaced From shott at snf.stanford.edu Sat May 19 08:24:49 2007 From: shott at snf.stanford.edu (shott at snf.stanford.edu) Date: Sat, 19 May 2007 08:24:49 -0700 Subject: Shutdown thermco2 SNF 2007-05-19 08:24:48: Needs restart after power failure ... Message-ID: From tberg at snf.stanford.edu Mon May 21 08:18:21 2007 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 21 May 2007 08:18:21 -0700 Subject: Shutdown thermco2 SNF 2007-05-19 08:24:48: Needs restart after power failure ... Message-ID: Updated tube , boat cal, 8mv cal loaded standby