From tberg at snf.stanford.edu Tue Oct 2 12:03:43 2007 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 2 Oct 2007 12:03:43 -0700 Subject: Comment thermcopoly1 SNF 2007-10-02 12:03:42: Pump Manometer replaced Message-ID: From tberg at snf.stanford.edu Tue Oct 2 12:04:04 2007 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 2 Oct 2007 12:04:04 -0700 Subject: Comment thermcopoly1 SNF 2007-09-26 10:51:20: Pump manometer is bad Message-ID: Noted From tberg at snf.stanford.edu Tue Oct 2 12:04:21 2007 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 2 Oct 2007 12:04:21 -0700 Subject: Comment thermcopoly1 SNF 2007-10-02 12:03:42: Pump Manometer replaced Message-ID: Noted From rik at snf.stanford.edu Wed Oct 3 12:40:31 2007 From: rik at snf.stanford.edu (rik at snf.stanford.edu) Date: Wed, 3 Oct 2007 12:40:31 -0700 Subject: Problem thermcopoly1 SNF 2007-10-03 12:40:30: Tube is not pumping down Message-ID: Running recipe P580PH3 with 8 sccm of PH3. The tube pressure does not drop during the first PUMP step. From maurice at snf.stanford.edu Wed Oct 3 13:23:56 2007 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 3 Oct 2007 13:23:56 -0700 Subject: Shutdown thermcopoly1 SNF 2007-10-03 13:23:55: failed leak check 3times Message-ID: not pumping down...even in standby program From tberg at snf.stanford.edu Fri Oct 5 08:06:19 2007 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 5 Oct 2007 08:06:19 -0700 Subject: Comment thermcopoly1 SNF 2007-10-05 08:06:19: Pump is bad out for repair Message-ID: From mdickey at snf.stanford.edu Wed Oct 10 09:00:23 2007 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Wed, 10 Oct 2007 09:00:23 -0700 Subject: Comment thermcopoly1 SNF 2007-10-10 09:00:22: Pump back Message-ID: Pump is back and installed. Currently monitoring pump and tube operation From mdickey at snf.stanford.edu Wed Oct 10 09:41:23 2007 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Wed, 10 Oct 2007 09:41:23 -0700 Subject: Comment thermcopoly1 SNF 2007-10-10 09:41:23: Test needed Message-ID: System passed leak check. Maurice to do a test. From maurice at snf.stanford.edu Wed Oct 10 16:50:17 2007 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 10 Oct 2007 16:50:17 -0700 Subject: Comment thermcopoly1 SNF 2007-10-10 09:41:23: Test needed Message-ID: Test good P580poly 00:45:00 expected 2220A actual 2307 From maurice at snf.stanford.edu Wed Oct 10 16:50:36 2007 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 10 Oct 2007 16:50:36 -0700 Subject: Comment thermcopoly1 SNF 2007-10-10 09:00:22: Pump back Message-ID: Test good P580poly 00:45:00 expected 2220A actual 2307 From maurice at snf.stanford.edu Wed Oct 10 16:50:54 2007 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 10 Oct 2007 16:50:54 -0700 Subject: Comment thermcopoly1 SNF 2007-10-05 08:06:19: Pump is bad out for repair Message-ID: pump rebuilt From maurice at snf.stanford.edu Wed Oct 10 16:51:21 2007 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 10 Oct 2007 16:51:21 -0700 Subject: Shutdown thermcopoly1 SNF 2007-10-03 13:23:55: failed leak check 3times Message-ID: bad pump...sent out for repair From maurice at snf.stanford.edu Wed Oct 10 16:51:57 2007 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 10 Oct 2007 16:51:57 -0700 Subject: Problem thermcopoly1 SNF 2007-10-03 12:40:30: Tube is not pumping down Message-ID: bad pump...sent out for repair From masaharu at snf.stanford.edu Sat Oct 13 11:07:49 2007 From: masaharu at snf.stanford.edu (masaharu at snf.stanford.edu) Date: Sat, 13 Oct 2007 11:07:49 -0700 Subject: Shutdown thermcopoly1 SNF 2007-10-13 11:07:48: pump doesn't work Message-ID: I run three times and every run was done successfully. But when I run stbypoly to shutdown system, pomp doesn't work and leak check was failed. I tried several times, but it didn't work at all. Therefore, now, tube is being left atmosphere. Please inspect the pump condition. Sorry for inconvenience after back-up. From tberg at snf.stanford.edu Mon Oct 15 07:39:32 2007 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 15 Oct 2007 07:39:32 -0700 Subject: Shutdown thermcopoly1 SNF 2007-10-13 11:07:48: pump doesn't work Message-ID: Restarted pump back in standby From tberg at snf.stanford.edu Mon Oct 15 07:39:50 2007 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 15 Oct 2007 07:39:50 -0700 Subject: Problem thermcopoly1 SNF 2007-10-15 07:39:49: Observing pump Message-ID: From king at snf.stanford.edu Mon Oct 15 13:34:21 2007 From: king at snf.stanford.edu (king at snf.stanford.edu) Date: Mon, 15 Oct 2007 13:34:21 -0700 Subject: Comment thermcopoly1 SNF 2007-10-15 13:34:21: Does the pumpdown work now? Message-ID: Have reservation today; please let us know if it works repeatably, thanks. From king at snf.stanford.edu Tue Oct 16 21:36:05 2007 From: king at snf.stanford.edu (king at snf.stanford.edu) Date: Tue, 16 Oct 2007 21:36:05 -0700 Subject: Problem thermcopoly1 SNF 2007-10-16 21:36:05: Tube didn't pump on its own Message-ID: because the door didn't close all the way. The behavior observed is that the door goes within a half inch of being closed, then goes into slow pump. When manually closing the door as was suggested, the tube can then pull a vacuum, but the loader motor might be trying to pull it back out at the same time (?) Maybe it's a misadjusted limit switch causing the recent problems? From rik at snf.stanford.edu Wed Oct 17 12:22:13 2007 From: rik at snf.stanford.edu (rik at snf.stanford.edu) Date: Wed, 17 Oct 2007 12:22:13 -0700 Subject: Problem thermcopoly1 SNF 2007-10-17 12:22:12: door is not closing properly Message-ID: The door requires a very forceful push to close completely. After pushing the door shut, the motor still runs continuously trying to pull the door back. This could burn out the door motor. From maurice at snf.stanford.edu Wed Oct 17 13:54:06 2007 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 17 Oct 2007 13:54:06 -0700 Subject: Shutdown thermcopoly1 SNF 2007-10-17 13:54:05: door not closed/ pump off Message-ID: Door did not close completely. The pump has kicked off. I think the boat needs to be cal'ed From king at snf.stanford.edu Wed Oct 17 14:55:44 2007 From: king at snf.stanford.edu (king at snf.stanford.edu) Date: Wed, 17 Oct 2007 14:55:44 -0700 Subject: Problem thermcopoly1 SNF 2007-10-17 14:55:43: On RIK's run the tube pumped down Message-ID: and passed leak check initially (I watched it run at first). Is there anyone here today (Wed at 2:45pm) who can restart the pump for him? I wasn't able to locate anyone by phone. From seymour at snf.stanford.edu Wed Oct 17 15:03:29 2007 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Wed, 17 Oct 2007 15:03:29 -0700 Subject: Shutdown thermcopoly1 SNF 2007-10-17 15:03:29: pump making unuasual noist when starting Message-ID: From maurice at snf.stanford.edu Thu Oct 18 10:42:38 2007 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Thu, 18 Oct 2007 10:42:38 -0700 Subject: Comment thermcopoly1 SNF 2007-10-18 10:42:38: testing Message-ID: Running a short poly dep From maurice at snf.stanford.edu Thu Oct 18 11:44:20 2007 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Thu, 18 Oct 2007 11:44:20 -0700 Subject: Comment thermcopoly1 SNF 2007-10-18 11:44:19: boat driving during run Message-ID: boat stalled From maurice at snf.stanford.edu Thu Oct 18 13:52:01 2007 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Thu, 18 Oct 2007 13:52:01 -0700 Subject: Shutdown thermcopoly1 SNF 2007-10-17 15:03:29: pump making unuasual noist when starting Message-ID: pump restarted. boat loader cal'ed Rishi (user:Rik) will run a test this afternoon From maurice at snf.stanford.edu Thu Oct 18 15:45:26 2007 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Thu, 18 Oct 2007 15:45:26 -0700 Subject: Shutdown thermcopoly1 SNF 2007-10-17 13:54:05: door not closed/ pump off Message-ID: pump restarted. boat loader cal'ed Rishi (user:Rik) will run a test tomorrow From tberg at snf.stanford.edu Fri Oct 26 09:13:21 2007 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 26 Oct 2007 09:13:21 -0700 Subject: Problem thermcopoly1 SNF 2007-10-15 07:39:49: Observing pump Message-ID: pump ok From tberg at snf.stanford.edu Fri Oct 26 09:13:40 2007 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 26 Oct 2007 09:13:40 -0700 Subject: Comment thermcopoly1 SNF 2007-10-15 13:34:21: Does the pumpdown work now? Message-ID: noteed From tberg at snf.stanford.edu Fri Oct 26 09:14:14 2007 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 26 Oct 2007 09:14:14 -0700 Subject: Problem thermcopoly1 SNF 2007-10-16 21:36:05: Tube didn't pump on its own Message-ID: did boat cal no further issues From tberg at snf.stanford.edu Fri Oct 26 09:14:26 2007 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 26 Oct 2007 09:14:26 -0700 Subject: Problem thermcopoly1 SNF 2007-10-17 12:22:12: door is not closing properly Message-ID: boat cal From tberg at snf.stanford.edu Fri Oct 26 09:14:54 2007 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 26 Oct 2007 09:14:54 -0700 Subject: Problem thermcopoly1 SNF 2007-10-17 14:55:43: On RIK's run the tube pumped down Message-ID: pumped ok From tberg at snf.stanford.edu Fri Oct 26 09:15:10 2007 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 26 Oct 2007 09:15:10 -0700 Subject: Comment thermcopoly1 SNF 2007-10-18 10:42:38: testing Message-ID: ok From tberg at snf.stanford.edu Fri Oct 26 09:15:29 2007 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 26 Oct 2007 09:15:29 -0700 Subject: Comment thermcopoly1 SNF 2007-10-18 11:44:19: boat driving during run Message-ID: boat cal From tberg at snf.stanford.edu Mon Oct 29 06:41:36 2007 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 29 Oct 2007 06:41:36 -0700 Subject: Shutdown thermcopoly1 SNF 2007-10-29 06:41:36: Not Pumping Message-ID: From tberg at snf.stanford.edu Mon Oct 29 07:32:32 2007 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 29 Oct 2007 07:32:32 -0700 Subject: Shutdown thermcopoly1 SNF 2007-10-29 06:41:36: Not Pumping Message-ID: PUmpin Ok Pump Manometer bad From maurice at snf.stanford.edu Tue Oct 30 10:49:01 2007 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Tue, 30 Oct 2007 10:49:01 -0700 Subject: Shutdown thermcopoly1 SNF 2007-10-30 10:49:01: failed leak Message-ID: Sora Kim reports that the tube failed leak check 3 times From tberg at snf.stanford.edu Tue Oct 30 13:54:30 2007 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 30 Oct 2007 13:54:30 -0700 Subject: Shutdown thermcopoly1 SNF 2007-10-30 10:49:01: failed leak Message-ID: ran standby 2 times passed fine both times