From king at snf.stanford.edu Fri Oct 3 23:14:54 2008 From: king at snf.stanford.edu (king at snf.stanford.edu) Date: Fri, 3 Oct 2008 23:14:54 -0700 Subject: Problem thermcopoly1 SNF 2008-10-03 23:14:54: Boat loading leak fail Message-ID: Didn't properly close properly during initial half gate. The gate valve opens all the way when the tube is at ATM, creating a sudden pressure change and the door smacking the tube. Shouldn't the gate valve open when it senses a low enough pressure, and not when a clock says three minutes? From tberg at snf.stanford.edu Mon Oct 6 07:21:51 2008 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 6 Oct 2008 07:21:51 -0700 Subject: Problem thermcopoly1 SNF 2008-10-03 23:14:54: Boat loading leak fail Message-ID: Did boat cal, ran stbypoly. Pumped down fine no problem with leak check From sbasumal at snf.stanford.edu Tue Oct 21 23:45:45 2008 From: sbasumal at snf.stanford.edu (sbasumal at snf.stanford.edu) Date: Tue, 21 Oct 2008 23:45:45 -0700 Subject: Problem thermcopoly1 SNF 2008-10-21 23:45:44: Leak Chk failed 3 times in a row Message-ID: From tberg at snf.stanford.edu Wed Oct 22 10:04:24 2008 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 22 Oct 2008 10:04:24 -0700 Subject: Problem thermcopoly1 SNF 2008-10-21 23:45:44: Leak Chk failed 3 times in a row Message-ID: Did bot cal and loaded standbypoly lek passed fine. Looks like door was not closed From tberg at snf.stanford.edu Thu Oct 23 07:37:43 2008 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Thu, 23 Oct 2008 07:37:43 -0700 Subject: Comment thermcopoly1 SNF 2008-10-23 07:37:43: Checked loader operation Message-ID: Ran p580ph3 recipe , pumped down fine then stbypoly no problem