From bchui at snf.stanford.edu Mon Nov 2 19:21:44 2009 From: bchui at snf.stanford.edu (bchui at snf.stanford.edu) Date: Mon, 2 Nov 2009 19:21:44 -0800 Subject: Shutdown thermcopoly1 SNF 2009-11-02 19:21:43: failed leak check twice Message-ID: Door appears to be severely out of alignment--gets worse with each attempted start. Started STBYPOLY but looks like it will fail because door is so badly out of position. From bchui at snf.stanford.edu Mon Nov 2 19:26:16 2009 From: bchui at snf.stanford.edu (bchui at snf.stanford.edu) Date: Mon, 2 Nov 2009 19:26:16 -0800 Subject: Comment thermcopoly1 SNF 2009-11-02 19:26:15: Addendum to prev msg Message-ID: Looks like at least it's able to pump down in STBY. (But door alignment is still off when running 'real' recipes) From mdickey at snf.stanford.edu Tue Nov 3 07:05:06 2009 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Tue, 3 Nov 2009 07:05:06 -0800 Subject: Comment thermcopoly1 SNF 2009-11-03 07:05:05: Oil Message-ID: Topped off pump oil From tberg at snf.stanford.edu Tue Nov 3 07:27:55 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 3 Nov 2009 07:27:55 -0800 Subject: Shutdown thermcopoly1 SNF 2009-11-02 19:21:43: failed leak check twice Message-ID: Did boat cal and ran stby poly no problem From tberg at snf.stanford.edu Tue Nov 3 07:28:31 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 3 Nov 2009 07:28:31 -0800 Subject: Comment thermcopoly1 SNF 2009-11-02 19:26:15: Addendum to prev msg Message-ID: Did boat cal and ran stby poly no problem From tberg at snf.stanford.edu Tue Nov 3 07:28:42 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 3 Nov 2009 07:28:42 -0800 Subject: Comment thermcopoly1 SNF 2009-09-28 13:01:51: OIl added Message-ID: noted From tberg at snf.stanford.edu Tue Nov 3 07:28:51 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 3 Nov 2009 07:28:51 -0800 Subject: Comment thermcopoly1 SNF 2009-10-12 07:36:41: Oil added Message-ID: noted From tberg at snf.stanford.edu Tue Nov 3 07:29:03 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 3 Nov 2009 07:29:03 -0800 Subject: Comment thermcopoly1 SNF 2009-09-11 21:12:29: Needs a boat cal Message-ID: done From tberg at snf.stanford.edu Tue Nov 3 07:29:12 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 3 Nov 2009 07:29:12 -0800 Subject: Comment thermcopoly1 SNF 2009-10-23 07:54:48: Oil added Message-ID: noted From maurice at snf.stanford.edu Wed Nov 11 16:27:34 2009 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 11 Nov 2009 16:27:34 -0800 Subject: Comment thermcopoly1 SNF 2009-11-11 16:27:34: Ran boat cal Message-ID: From rik at snf.stanford.edu Wed Nov 11 22:20:59 2009 From: rik at snf.stanford.edu (rik at snf.stanford.edu) Date: Wed, 11 Nov 2009 22:20:59 -0800 Subject: Problem thermcopoly1 SNF 2009-11-11 22:20:59: Wand head needs replacement for thermco stack Message-ID: From rik at snf.stanford.edu Wed Nov 11 22:49:06 2009 From: rik at snf.stanford.edu (rik at snf.stanford.edu) Date: Wed, 11 Nov 2009 22:49:06 -0800 Subject: Comment thermcopoly1 SNF 2009-11-11 22:49:06: Performed boat cal Message-ID: From seymour at snf.stanford.edu Thu Nov 12 10:41:14 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Thu, 12 Nov 2009 10:41:14 -0800 Subject: Problem thermcopoly1 SNF 2009-11-11 22:20:59: Wand head needs replacement for thermco stack Message-ID: vac wand tip replaced From bchui at snf.stanford.edu Fri Nov 13 19:33:34 2009 From: bchui at snf.stanford.edu (bchui at snf.stanford.edu) Date: Fri, 13 Nov 2009 19:33:34 -0800 Subject: Problem thermcopoly1 SNF 2009-11-13 19:33:34: Boat stalls during boat-in Message-ID: One can hear the motor trying to push the boat in even though it's obviously all the way in. After 10 min or so, alarms saying "BOAT STALLED" and nothing happens. Tried two times with same result; gave up on the run. I loaded POLYOUT to unload the tube then STBYPOLY. From bchui at snf.stanford.edu Fri Nov 13 19:56:50 2009 From: bchui at snf.stanford.edu (bchui at snf.stanford.edu) Date: Fri, 13 Nov 2009 19:56:50 -0800 Subject: Comment thermcopoly1 SNF 2009-11-13 19:56:49: Re: previous problem report Message-ID: I noticed that the motor is always trying to pull the boat to position "0", but the boat is already fully in at position "1". So it never gets to the desired position and the program hangs. From fanpy at snf.stanford.edu Sat Nov 14 01:20:09 2009 From: fanpy at snf.stanford.edu (fanpy at snf.stanford.edu) Date: Sat, 14 Nov 2009 01:20:09 -0800 Subject: Shutdown thermcopoly1 SNF 2009-11-14 01:20:08: Motor problem? Message-ID: As described by previous user. The boat was 1/3 out when I came on the tool. Did boat calibration. The movement of the boat is generally very weird (it keeps moving back and forth when it's coming out, and might stop sometimes). When I ran any recipe, after the boat went in, the motor will keep working and the tube entered a status called "BOATSTA" and at the end of this step, the whole recipe will go to "complete" and the boat starts to come out. I use "enable" + "boat in" to manually send the boat back in, but did not run STBYPOLY in fear of the boat might come out at some point. From rik at snf.stanford.edu Sat Nov 14 16:10:02 2009 From: rik at snf.stanford.edu (rik at snf.stanford.edu) Date: Sat, 14 Nov 2009 16:10:02 -0800 Subject: Shutdown thermcopoly1 SNF 2009-11-14 16:10:01: Ran boat cal again and tried to run STBYPOLY. Boat got stuck in recipe. Message-ID: From tberg at snf.stanford.edu Mon Nov 16 06:38:09 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 16 Nov 2009 06:38:09 -0800 Subject: Problem thermcopoly1 SNF 2009-11-13 19:33:34: Boat stalls during boat-in Message-ID: Did boat cal and reset in position From tberg at snf.stanford.edu Mon Nov 16 06:38:21 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 16 Nov 2009 06:38:21 -0800 Subject: Shutdown thermcopoly1 SNF 2009-11-14 01:20:08: Motor problem? Message-ID: Did boat cal and reset in position From tberg at snf.stanford.edu Mon Nov 16 06:38:34 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 16 Nov 2009 06:38:34 -0800 Subject: Comment thermcopoly1 SNF 2009-11-13 19:56:49: Re: previous problem report Message-ID: Did boat cal and reset in position From tberg at snf.stanford.edu Mon Nov 16 06:38:57 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 16 Nov 2009 06:38:57 -0800 Subject: Shutdown thermcopoly1 SNF 2009-11-14 16:10:01: Ran boat cal again and tried to run STBYPOLY. Boat got stuck in recipe. Message-ID: Did boat cal and reset in position. ran stbypoly ok From mdickey at snf.stanford.edu Mon Nov 16 08:15:39 2009 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Mon, 16 Nov 2009 08:15:39 -0800 Subject: Comment thermcopoly1 SNF 2009-11-16 08:15:38: Oil added Message-ID: Added oil to the pump From mdickey at snf.stanford.edu Tue Nov 24 07:31:33 2009 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Tue, 24 Nov 2009 07:31:33 -0800 Subject: Comment thermcopoly1 SNF 2009-11-24 07:31:33: Oil added Message-ID: Oil added to pump