From dongrip at snf.stanford.edu  Sun Apr 10 14:00:43 2011
From: dongrip at snf.stanford.edu (dongrip at snf.stanford.edu)
Date: Sun, 10 Apr 2011 14:00:43 -0700
Subject: Problem thermcopoly1 SNF 2011-04-10 14:00:42: stop during the boat-in step
Message-ID: <mailman.716.1356283574.4877.thermcopoly1-pcs@snf.stanford.edu>

It may need boat-cal, becuase the boat stops before fully reaching the door during the boat-in step, and the program automatically runs a pumping step. As a temporal resolution, I manually boated-in the tube by pressing both enable and boat-in keys, and everything looked fine. 



From tberg at snf.stanford.edu  Mon Apr 11 10:28:49 2011
From: tberg at snf.stanford.edu (tberg at snf.stanford.edu)
Date: Mon, 11 Apr 2011 10:28:49 -0700
Subject: Problem thermcopoly1 SNF 2011-04-10 14:00:42: stop during the boat-in step
Message-ID: <mailman.717.1356283574.4877.thermcopoly1-pcs@snf.stanford.edu>

Did boat cal and ran stbypoly no problem



From tberg at snf.stanford.edu  Mon Apr 11 10:29:10 2011
From: tberg at snf.stanford.edu (tberg at snf.stanford.edu)
Date: Mon, 11 Apr 2011 10:29:10 -0700
Subject: Comment thermcopoly1 SNF 2011-03-28 08:19:08: ran P620PH3
Message-ID: <mailman.718.1356283574.4877.thermcopoly1-pcs@snf.stanford.edu>

Noted



From tberg at snf.stanford.edu  Mon Apr 11 10:29:22 2011
From: tberg at snf.stanford.edu (tberg at snf.stanford.edu)
Date: Mon, 11 Apr 2011 10:29:22 -0700
Subject: Comment thermcopoly1 SNF 2011-01-31 11:06:40: added 3 dummies
Message-ID: <mailman.719.1356283574.4877.thermcopoly1-pcs@snf.stanford.edu>

noted



From tberg at snf.stanford.edu  Mon Apr 18 05:54:26 2011
From: tberg at snf.stanford.edu (tberg at snf.stanford.edu)
Date: Mon, 18 Apr 2011 05:54:26 -0700
Subject: Shutdown thermcopoly1 SNF 2011-04-18 05:54:25: burnbox
Message-ID: <mailman.720.1356283574.4877.thermcopoly1-pcs@snf.stanford.edu>




From tberg at snf.stanford.edu  Mon Apr 18 08:46:26 2011
From: tberg at snf.stanford.edu (tberg at snf.stanford.edu)
Date: Mon, 18 Apr 2011 08:46:26 -0700
Subject: Shutdown thermcopoly1 SNF 2011-04-18 05:54:25: burnbox
Message-ID: <mailman.721.1356283574.4877.thermcopoly1-pcs@snf.stanford.edu>

Element replaced, back at temp-System in standby



From tberg at snf.stanford.edu  Wed Apr 20 10:30:35 2011
From: tberg at snf.stanford.edu (tberg at snf.stanford.edu)
Date: Wed, 20 Apr 2011 10:30:35 -0700
Subject: Shutdown thermcopoly1 SNF 2011-04-20 10:30:34: burnbox
Message-ID: <mailman.722.1356283574.4877.thermcopoly1-pcs@snf.stanford.edu>




From tberg at snf.stanford.edu  Wed Apr 20 13:45:01 2011
From: tberg at snf.stanford.edu (tberg at snf.stanford.edu)
Date: Wed, 20 Apr 2011 13:45:01 -0700
Subject: Shutdown thermcopoly1 SNF 2011-04-20 10:30:34: burnbox
Message-ID: <mailman.723.1356283574.4877.thermcopoly1-pcs@snf.stanford.edu>

Repaired connection on burn box. Back up to temp. System back in 
standby



From rik at snf.stanford.edu  Tue Apr 26 18:01:03 2011
From: rik at snf.stanford.edu (rik at snf.stanford.edu)
Date: Tue, 26 Apr 2011 18:01:03 -0700
Subject: Comment thermcopoly1 SNF 2011-04-26 18:01:03: Found tube vented
Message-ID: <mailman.724.1356283574.4877.thermcopoly1-pcs@snf.stanford.edu>

Tube was not running the STBY recipe when I checked it. Started recipe now



From mislam at snf.stanford.edu  Fri Apr 29 23:19:47 2011
From: mislam at snf.stanford.edu (mislam at snf.stanford.edu)
Date: Fri, 29 Apr 2011 23:19:47 -0700
Subject: Problem thermcopoly1 SNF 2011-04-29 23:19:47: Cantilever transport problem
Message-ID: <mailman.725.1356283574.4877.thermcopoly1-pcs@snf.stanford.edu>

Loader stops short of the tube and tube can not pump down.  Cantilver movement seems to be out of calibration.