From dongrip at snf.stanford.edu Sat Feb 5 09:00:21 2011 From: dongrip at snf.stanford.edu (dongrip at snf.stanford.edu) Date: Sat, 5 Feb 2011 09:00:21 -0800 Subject: Problem thermcopoly1 SNF 2011-02-05 09:00:20: leak fail Message-ID: need boat cal, but I don't know how to do it... From cchen86 at snf.stanford.edu Sat Feb 5 19:01:23 2011 From: cchen86 at snf.stanford.edu (cchen86 at snf.stanford.edu) Date: Sat, 5 Feb 2011 19:01:23 -0800 Subject: Problem thermcopoly1 SNF 2011-02-05 19:01:22: Leak fail: pump does not seem working at all Message-ID: From cchen86 at snf.stanford.edu Sat Feb 5 19:01:50 2011 From: cchen86 at snf.stanford.edu (cchen86 at snf.stanford.edu) Date: Sat, 5 Feb 2011 19:01:50 -0800 Subject: Shutdown thermcopoly1 SNF 2011-02-05 19:01:49: leak fail several times Message-ID: From tberg at snf.stanford.edu Mon Feb 7 07:13:45 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 7 Feb 2011 07:13:45 -0800 Subject: Problem thermcopoly1 SNF 2011-02-05 09:00:20: leak fail Message-ID: Ran boat cal and ran stbypoly no problem From tberg at snf.stanford.edu Mon Feb 7 07:13:53 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 7 Feb 2011 07:13:53 -0800 Subject: Problem thermcopoly1 SNF 2011-02-05 19:01:22: Leak fail: pump does not seem working at all Message-ID: Ran boat cal and ran stbypoly no problem From tberg at snf.stanford.edu Mon Feb 7 07:14:02 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 7 Feb 2011 07:14:02 -0800 Subject: Shutdown thermcopoly1 SNF 2011-02-05 19:01:49: leak fail several times Message-ID: Ran boat cal and ran stbypoly no problem From bchui at snf.stanford.edu Tue Feb 8 17:34:30 2011 From: bchui at snf.stanford.edu (bchui at snf.stanford.edu) Date: Tue, 8 Feb 2011 17:34:30 -0800 Subject: Comment thermcopoly1 SNF 2011-02-08 17:34:30: Recalibrated boat Message-ID: Boat was initially off-position and initial push-in failed. After recal, run started successfully. From bchui at snf.stanford.edu Thu Feb 17 01:39:22 2011 From: bchui at snf.stanford.edu (bchui at snf.stanford.edu) Date: Thu, 17 Feb 2011 01:39:22 -0800 Subject: Shutdown thermcopoly1 SNF 2011-02-17 01:39:22: Failed leak check twice Message-ID: Failed leak check twice while trying to run P580POLY. Did boat recal in between the two attempts; didn't make a difference. Tube appeared to have pumped down just fine thru the BASE PCR step, but leaked back faster than normal (LEAKFAIL alarm appeared after appx 15 sec). "LSP FAIL" appeared on the screen next to the B2H6V field. From bchui at snf.stanford.edu Thu Feb 17 19:24:21 2011 From: bchui at snf.stanford.edu (bchui at snf.stanford.edu) Date: Thu, 17 Feb 2011 19:24:21 -0800 Subject: Comment thermcopoly1 SNF 2011-02-17 19:24:21: Staff troubleshooting Message-ID: Per Maurice, Feb 17 From tberg at snf.stanford.edu Thu Feb 24 14:56:28 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Thu, 24 Feb 2011 14:56:28 -0800 Subject: Comment thermcopoly1 SNF 2011-02-24 14:56:27: changing the tube Message-ID: From tberg at snf.stanford.edu Fri Feb 25 10:47:36 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 25 Feb 2011 10:47:36 -0800 Subject: Comment thermcopoly1 SNF 2011-02-08 17:34:30: Recalibrated boat Message-ID: Replaced tube, leak checked fine, in Coat at this time will need test From tberg at snf.stanford.edu Fri Feb 25 10:47:43 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 25 Feb 2011 10:47:43 -0800 Subject: Shutdown thermcopoly1 SNF 2011-02-17 01:39:22: Failed leak check twice Message-ID: Replaced tube, leak checked fine, in Coat at this time will need test From tberg at snf.stanford.edu Fri Feb 25 10:47:52 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 25 Feb 2011 10:47:52 -0800 Subject: Comment thermcopoly1 SNF 2011-02-17 19:24:21: Staff troubleshooting Message-ID: Replaced tube, leak checked fine, in Coat at this time will need test From tberg at snf.stanford.edu Fri Feb 25 10:48:10 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 25 Feb 2011 10:48:10 -0800 Subject: Comment thermcopoly1 SNF 2011-02-17 19:24:21: Staff troubleshooting Message-ID: Replaced tube, leak checked fine, in Coat at this time will need test From tberg at snf.stanford.edu Fri Feb 25 10:48:23 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 25 Feb 2011 10:48:23 -0800 Subject: Comment thermcopoly1 SNF 2011-02-24 14:56:27: changing the tube Message-ID: Replaced tube, leak checked fine, in Coat at this time will need test From tberg at snf.stanford.edu Fri Feb 25 10:48:47 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 25 Feb 2011 10:48:47 -0800 Subject: Problem thermcopoly1 SNF 2011-02-25 10:48:47: Needs test after coat Message-ID: From maurice at snf.stanford.edu Fri Feb 25 15:32:10 2011 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Fri, 25 Feb 2011 15:32:10 -0800 Subject: Problem thermcopoly1 SNF 2011-02-25 10:48:47: Needs test after coat Message-ID: Test complete P580POLY 00:23:30 expected 900Ang actual 970