From tberg at snf.stanford.edu Fri Jun 3 08:24:53 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 3 Jun 2011 08:24:53 -0700 Subject: Problem thermcopoly1 SNF 2011-06-03 08:24:53: no germane Message-ID: From tberg at snf.stanford.edu Fri Jun 3 08:57:43 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 3 Jun 2011 08:57:43 -0700 Subject: Comment thermcopoly1 SNF 2011-06-03 08:57:42: cylinder changed with Epi Message-ID: in leak check From seymour at snf.stanford.edu Fri Jun 3 14:09:54 2011 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Fri, 3 Jun 2011 14:09:54 -0700 Subject: Problem thermcopoly1 SNF 2011-06-03 08:24:53: no germane Message-ID: germane cylinder changed, passed leak check From seymour at snf.stanford.edu Fri Jun 3 14:15:18 2011 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Fri, 3 Jun 2011 14:15:18 -0700 Subject: Comment thermcopoly1 SNF 2011-06-03 08:57:42: cylinder changed with Epi Message-ID: crylinder changed and leak check passed From narii at snf.stanford.edu Sun Jun 12 23:59:32 2011 From: narii at snf.stanford.edu (narii at snf.stanford.edu) Date: Sun, 12 Jun 2011 23:59:32 -0700 Subject: Problem thermcopoly1 SNF 2011-06-12 23:59:32: Boat cal. error Message-ID: Tube not correctly closed at the beginning of the run. Pump down failed and stalled. From seymour at snf.stanford.edu Mon Jun 13 08:40:38 2011 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Mon, 13 Jun 2011 08:40:38 -0700 Subject: Problem thermcopoly1 SNF 2011-06-13 08:40:38: changing germane cylinder Message-ID: From tberg at snf.stanford.edu Mon Jun 13 09:07:51 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 13 Jun 2011 09:07:51 -0700 Subject: Problem thermcopoly1 SNF 2011-06-12 23:59:32: Boat cal. error Message-ID: Adjusted boat loader and did boat cal. Ran standbypoly no problem. Base and leak good From seymour at snf.stanford.edu Mon Jun 13 14:10:06 2011 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Mon, 13 Jun 2011 14:10:06 -0700 Subject: Problem thermcopoly1 SNF 2011-06-13 08:40:38: changing germane cylinder Message-ID: cylinder passed ;eak check From seymour at snf.stanford.edu Mon Jun 13 14:10:56 2011 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Mon, 13 Jun 2011 14:10:56 -0700 Subject: Comment thermcopoly1 SNF 2011-06-13 14:10:55: new germane cylinder p[assed leak check Message-ID: From tberg at snf.stanford.edu Tue Jun 14 08:40:04 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 14 Jun 2011 08:40:04 -0700 Subject: Problem thermcopoly1 SNF 2011-05-26 12:21:21: Boat stalled Message-ID: Adjusted loader and did boat cal. ran stbypoly From tberg at snf.stanford.edu Tue Jun 14 08:40:15 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 14 Jun 2011 08:40:15 -0700 Subject: Comment thermcopoly1 SNF 2011-05-26 13:53:38: Got it going Message-ID: Adjusted loader and did boat cal. ran stbypoly From rik at snf.stanford.edu Wed Jun 29 16:41:35 2011 From: rik at snf.stanford.edu (rik at snf.stanford.edu) Date: Wed, 29 Jun 2011 16:41:35 -0700 Subject: Problem thermcopoly1 SNF 2011-06-29 16:41:34: Tube did not pump down in recipe Message-ID: During BASE PCR step, the tube did not pump down at all. The PUMP line shows low pressure (57mTorr) but the AUX line shows high pressure. Will try the standby recipe. From maurice at snf.stanford.edu Thu Jun 30 09:48:42 2011 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Thu, 30 Jun 2011 09:48:42 -0700 Subject: Problem thermcopoly1 SNF 2011-06-29 16:41:34: Tube did not pump down in recipe Message-ID: did a boat cal pass leak check