From seymour at snf.stanford.edu Mon Apr 2 08:20:30 2012 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Mon, 2 Apr 2012 08:20:30 -0700 Subject: Comment thermcopoly1 SNF 2012-04-02 08:20:29: tube status Message-ID: I foundtube pump down with 1 slpm n2 flow, pressure 238 mT. State is process hold recipe is JRS501. The tube is on hold in temp stabelize step. The temp is ok. I dont see any problems causing the tube to be down in problem mode. From wslee at snf.stanford.edu Wed Apr 4 09:42:21 2012 From: wslee at snf.stanford.edu (wslee at snf.stanford.edu) Date: Wed, 4 Apr 2012 09:42:21 -0700 Subject: Comment thermcopoly1 SNF 2012-04-04 09:42:20: ran boatcal Message-ID: I ran the boatcal recipe and turned the tube over to user cchen86 to run his process. From tberg at snf.stanford.edu Fri Apr 6 14:00:02 2012 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 6 Apr 2012 14:00:02 -0700 Subject: Problem thermcopoly1 SNF 2012-03-27 06:07:34: no B2H6 Message-ID: B2H6 Regulator installed and leak checked back in service From tberg at snf.stanford.edu Fri Apr 6 14:00:33 2012 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 6 Apr 2012 14:00:33 -0700 Subject: Problem thermcopoly1 SNF 2012-03-30 15:57:14: Leakfail Message-ID: no problem noted