From jrjain at snf.stanford.edu Sun Feb 8 19:21:13 2009 From: jrjain at snf.stanford.edu (jrjain at snf.stanford.edu) Date: Sun, 8 Feb 2009 19:21:13 -0800 Subject: Problem thermcopoly2 SNF 2009-02-08 19:21:13: Gas and Event Table Missing Message-ID: Ran a temp test on Friday. I just came to check status and load another test recipe (Sunday night), but when I attempted to do so, I received the above Table errors. Unfortunately, I had already pressed START to vent the furnace and bring the boat out. The tube is currently vented (aborted in the middle when I realized there was a computer problem), since I couldn't access (or even view) any other recipes, including the pump recipe. It seems like the memory has been erased or there is a communication error. From jrjain at snf.stanford.edu Sun Feb 8 19:26:17 2009 From: jrjain at snf.stanford.edu (jrjain at snf.stanford.edu) Date: Sun, 8 Feb 2009 19:26:17 -0800 Subject: Comment thermcopoly2 SNF 2009-02-08 19:26:16: Tube pumped Message-ID: Eric P had the good idea to just rerun the recipe that was run on Friday (that recipe was still loaded in memory). So, the tube is running the previous temp test and should be left under vacuum for morning inspection. From tberg at snf.stanford.edu Mon Feb 9 07:32:43 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 9 Feb 2009 07:32:43 -0800 Subject: Problem thermcopoly2 SNF 2009-02-08 19:21:13: Gas and Event Table Missing Message-ID: Rebooted computerand backed up files. Looks OK now From tberg at snf.stanford.edu Mon Feb 9 07:33:27 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 9 Feb 2009 07:33:27 -0800 Subject: Comment thermcopoly2 SNF 2009-02-08 19:26:16: Tube pumped Message-ID: Rebooted computerand backed up files. Looks OK now From skoh at snf.stanford.edu Sun Feb 22 15:54:16 2009 From: skoh at snf.stanford.edu (skoh at snf.stanford.edu) Date: Sun, 22 Feb 2009 15:54:16 -0800 Subject: Problem thermcopoly2 SNF 2009-02-22 15:54:15: Gas and Event Tables Missing Message-ID: It was at the end of my recipe - boat was out. I tried to load the PPOLCOAT recipe, but the computer states that recipe does not exist. When I checked the tube status - Gas and Event Tables missing error was shown. Since I didn't want the boat to sit outside, I just restarted the recipe I ran previously to boat in. A PPOLCOAT for 30min would be needed after the system is rebooted. Thanks. From tberg at snf.stanford.edu Mon Feb 23 07:18:54 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 23 Feb 2009 07:18:54 -0800 Subject: Problem thermcopoly2 SNF 2009-02-22 15:54:15: Gas and Event Tables Missing Message-ID: Rebooted Host computer From tberg at snf.stanford.edu Tue Feb 24 06:01:53 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 24 Feb 2009 06:01:53 -0800 Subject: Shutdown thermcopoly2 SNF 2009-02-24 06:01:53: Looks like SCSI I Controller is bad Message-ID: Mother board is on order From tberg at snf.stanford.edu Tue Feb 24 14:23:32 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 24 Feb 2009 14:23:32 -0800 Subject: Shutdown thermcopoly2 SNF 2009-02-24 06:01:53: Looks like SCSI I Controller is bad Message-ID: Running on second hard drive temporarily From tberg at snf.stanford.edu Tue Feb 24 14:24:00 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 24 Feb 2009 14:24:00 -0800 Subject: Problem thermcopoly2 SNF 2009-02-24 14:23:59: bad hard drive Message-ID: Running on second hard drive temporarily From tberg at snf.stanford.edu Wed Feb 25 12:52:29 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 25 Feb 2009 12:52:29 -0800 Subject: Problem thermcopoly2 SNF 2009-02-24 14:23:59: bad hard drive Message-ID: Replaced hard drive checked operation