From tberg at snf.stanford.edu Tue Aug 10 07:21:18 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 10 Aug 2010 07:21:18 -0700 Subject: Shutdown thermcopoly2 SNF 2010-08-10 07:21:17: checking out burn box Message-ID: From tberg at snf.stanford.edu Fri Aug 13 12:50:31 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 13 Aug 2010 12:50:31 -0700 Subject: Shutdown thermcopoly2 SNF 2010-08-10 07:21:17: checking out burn box Message-ID: Burn box rebuilt and back at temp looks OK From tberg at snf.stanford.edu Mon Aug 16 11:43:21 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 16 Aug 2010 11:43:21 -0700 Subject: Shutdown thermcopoly2 SNF 2010-08-16 11:43:20: Not pumping after power down Message-ID: From tberg at snf.stanford.edu Mon Aug 16 12:12:41 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 16 Aug 2010 12:12:41 -0700 Subject: Comment thermcopoly2 SNF 2010-08-16 12:12:41: did boaT AND TEMP CALS Message-ID: From tberg at snf.stanford.edu Tue Aug 17 13:00:18 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 17 Aug 2010 13:00:18 -0700 Subject: Comment thermcopoly2 SNF 2010-08-17 13:00:17: 15VDC power supply is dead Message-ID: From tberg at snf.stanford.edu Wed Aug 18 13:22:42 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 18 Aug 2010 13:22:42 -0700 Subject: Shutdown thermcopoly2 SNF 2010-08-16 11:43:20: Not pumping after power down Message-ID: Replaced 15V power supply did boat and temp cal From tberg at snf.stanford.edu Wed Aug 18 13:23:32 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 18 Aug 2010 13:23:32 -0700 Subject: Comment thermcopoly2 SNF 2010-08-17 13:00:17: 15VDC power supply is dead Message-ID: replaced 15V ps did boat and temp cals From tberg at snf.stanford.edu Wed Aug 18 13:24:43 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 18 Aug 2010 13:24:43 -0700 Subject: Comment thermcopoly2 SNF 2010-08-16 12:12:41: did boaT AND TEMP CALS Message-ID: noted From tberg at snf.stanford.edu Wed Aug 18 13:24:54 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 18 Aug 2010 13:24:54 -0700 Subject: Comment thermcopoly2 SNF 2010-07-29 08:35:52: did boat and temp cals-loaded standby Message-ID: noted From liangjl at snf.stanford.edu Thu Aug 19 00:53:23 2010 From: liangjl at snf.stanford.edu (liangjl at snf.stanford.edu) Date: Thu, 19 Aug 2010 00:53:23 -0700 Subject: Problem thermcopoly2 SNF 2010-08-19 00:53:22: leak check fail for several times Message-ID: base pressure cannot go below 70 mtorr. Something is wrong From tberg at snf.stanford.edu Thu Aug 19 07:15:35 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Thu, 19 Aug 2010 07:15:35 -0700 Subject: Problem thermcopoly2 SNF 2010-08-19 00:53:22: leak check fail for several times Message-ID: replaced 2 T manometer for tube base is 12 mT leak is 3 ran stbypoly no problems From seymour at snf.stanford.edu Tue Aug 24 07:11:51 2010 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Tue, 24 Aug 2010 07:11:51 -0700 Subject: Problem thermcopoly2 SNF 2010-07-22 12:15:48: 15% Phosphine/Silane cylinder very near empty. Message-ID: cylinder hasa been installed and passed leak check. line charged with phosphine/silane From seymour at snf.stanford.edu Tue Aug 24 07:12:17 2010 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Tue, 24 Aug 2010 07:12:17 -0700 Subject: Comment thermcopoly2 SNF 2010-08-24 07:12:16: phosphine is back on to tool Message-ID: