From maurice at snf.stanford.edu  Sun Dec  5 20:22:38 2010
From: maurice at snf.stanford.edu (maurice at snf.stanford.edu)
Date: Sun, 5 Dec 2010 20:22:38 -0800
Subject: Problem thermcopoly2 SNF 2010-12-05 20:22:38: N2 Hi not flowing
Message-ID: <mailman.157.1356283593.4893.thermcopoly2-pcs@snf.stanford.edu>

Dongrip reports that the N2Hi was flashing and showed 0 flowing (setpoint is 9 slm) during the backfill and boat out steps of the P620PH3 recipe.



From tberg at snf.stanford.edu  Mon Dec  6 09:41:00 2010
From: tberg at snf.stanford.edu (tberg at snf.stanford.edu)
Date: Mon, 6 Dec 2010 09:41:00 -0800
Subject: Problem thermcopoly2 SNF 2010-12-05 20:22:38: N2 Hi not flowing
Message-ID: <mailman.158.1356283593.4893.thermcopoly2-pcs@snf.stanford.edu>

Repaired broken wire on gas interface board. checked flows



From tberg at snf.stanford.edu  Mon Dec 20 06:57:40 2010
From: tberg at snf.stanford.edu (tberg at snf.stanford.edu)
Date: Mon, 20 Dec 2010 06:57:40 -0800
Subject: Shutdown thermcopoly2 SNF 2010-12-20 06:57:40: power off
Message-ID: <mailman.159.1356283593.4893.thermcopoly2-pcs@snf.stanford.edu>




From tberg at snf.stanford.edu  Wed Dec 29 08:20:26 2010
From: tberg at snf.stanford.edu (tberg at snf.stanford.edu)
Date: Wed, 29 Dec 2010 08:20:26 -0800
Subject: Shutdown thermcopoly2 SNF 2010-12-20 06:57:40: power off
Message-ID: <mailman.160.1356283593.4893.thermcopoly2-pcs@snf.stanford.edu>

Power is back on but pump is dead



From tberg at snf.stanford.edu  Wed Dec 29 08:20:52 2010
From: tberg at snf.stanford.edu (tberg at snf.stanford.edu)
Date: Wed, 29 Dec 2010 08:20:52 -0800
Subject: Shutdown thermcopoly2 SNF 2010-12-29 08:20:52: Pump is Dead
Message-ID: <mailman.161.1356283593.4893.thermcopoly2-pcs@snf.stanford.edu>

Sent out for rebuild