From maurice at snf.stanford.edu Thu Jul 1 11:41:12 2010 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Thu, 1 Jul 2010 11:41:12 -0700 Subject: Shutdown thermcopoly2 SNF 2010-06-30 17:14:00: Possible leak Message-ID: Ted wiped off door and inspected tube. The base and leak rate look good. System need a process test. From maurice at snf.stanford.edu Thu Jul 1 11:41:56 2010 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Thu, 1 Jul 2010 11:41:56 -0700 Subject: Problem thermcopoly2 SNF 2010-07-01 11:41:55: Needs a test Message-ID: Ted wiped off door and inspected tube after the report of a possible leak. The base and leak rate look good. System need a process test. From maurice at snf.stanford.edu Tue Jul 6 11:15:29 2010 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Tue, 6 Jul 2010 11:15:29 -0700 Subject: Problem thermcopoly2 SNF 2010-07-01 11:41:55: Needs a test Message-ID: Users have run 11 runs since tube was last inspected and there nare no reported leak issues From seymour at snf.stanford.edu Thu Jul 22 12:15:48 2010 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Thu, 22 Jul 2010 12:15:48 -0700 Subject: Problem thermcopoly2 SNF 2010-07-22 12:15:48: 15% Phosphine/Silane cylinder very near empty. Message-ID: There has been very high drains on the cylinder during two days on the last couple of weeks. The replacement is due in about 7/29. From tberg at snf.stanford.edu Thu Jul 29 08:35:53 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Thu, 29 Jul 2010 08:35:53 -0700 Subject: Comment thermcopoly2 SNF 2010-07-29 08:35:52: did boat and temp cals-loaded standby Message-ID: did boat and temp cals-loaded standby