From king at snf.stanford.edu Wed Mar 3 19:30:35 2010 From: king at snf.stanford.edu (king at snf.stanford.edu) Date: Wed, 3 Mar 2010 19:30:35 -0800 Subject: Problem thermcopoly2 SNF 2010-03-03 19:30:35: Broken cassette Message-ID: I went to run a test but found a broken boat with pieces inside the tube. From king at snf.stanford.edu Wed Mar 3 23:30:05 2010 From: king at snf.stanford.edu (king at snf.stanford.edu) Date: Wed, 3 Mar 2010 23:30:05 -0800 Subject: Shutdown thermcopoly2 SNF 2010-03-03 23:30:04: same problem as before Message-ID: it's probably not good to run this with lots of broken glass in the tube. From maurice at snf.stanford.edu Thu Mar 4 10:34:17 2010 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Thu, 4 Mar 2010 10:34:17 -0800 Subject: Shutdown thermcopoly2 SNF 2010-03-03 23:30:04: same problem as before Message-ID: removed and replaced broken boat From maurice at snf.stanford.edu Thu Mar 4 10:34:22 2010 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Thu, 4 Mar 2010 10:34:22 -0800 Subject: Problem thermcopoly2 SNF 2010-03-03 19:30:35: Broken cassette Message-ID: removed and replaced broken boat From ludwig at snf.stanford.edu Tue Mar 16 16:40:14 2010 From: ludwig at snf.stanford.edu (ludwig at snf.stanford.edu) Date: Tue, 16 Mar 2010 16:40:14 -0700 Subject: Problem thermcopoly2 SNF 2010-03-16 16:40:13: PH3 FLOW Message-ID: THE SETPOINT WAS 2 BUT THE ACTUAL FLOW WAS 6 The processed used was P620PH3 for 1h From tberg at snf.stanford.edu Wed Mar 17 11:25:50 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 17 Mar 2010 11:25:50 -0700 Subject: Comment thermcopoly2 SNF 2010-03-17 11:25:49: Looking into flow issues Message-ID: Looking into flow issues From tberg at snf.stanford.edu Wed Mar 17 12:40:13 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 17 Mar 2010 12:40:13 -0700 Subject: Comment thermcopoly2 SNF 2010-03-17 12:40:12: Found gas table did not match MFC Message-ID: Found gas table did not match MFC. it thought mfc was 10 sccm so flow was doubled, Corrected table. From ludwig at snf.stanford.edu Wed Mar 17 17:44:44 2010 From: ludwig at snf.stanford.edu (ludwig at snf.stanford.edu) Date: Wed, 17 Mar 2010 17:44:44 -0700 Subject: Problem thermcopoly2 SNF 2010-03-17 17:44:43: PH3 Message-ID: The PH3 controller does not work, Ted is working on it, do not use any PH3 processing until further notice From tberg at snf.stanford.edu Mon Mar 22 08:17:00 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 22 Mar 2010 08:17:00 -0700 Subject: Comment thermcopoly2 SNF 2010-03-22 08:16:59: Waiting for PH3 MFC Message-ID: From tberg at snf.stanford.edu Mon Mar 29 06:19:57 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 29 Mar 2010 06:19:57 -0700 Subject: Problem thermcopoly2 SNF 2010-03-29 06:19:57: No GeH4 Message-ID: Changing Cylinders From tberg at snf.stanford.edu Mon Mar 29 13:43:40 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 29 Mar 2010 13:43:40 -0700 Subject: Problem thermcopoly2 SNF 2010-03-29 06:19:57: No GeH4 Message-ID: Replaced cylinder leak check From tberg at snf.stanford.edu Mon Mar 29 13:49:23 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 29 Mar 2010 13:49:23 -0700 Subject: Comment thermcopoly2 SNF 2010-03-29 13:49:23: replaced mfc Message-ID: Replaced PH3 MFC could not check out because user ran WAY over run has been completed since 6:00am From tberg at snf.stanford.edu Tue Mar 30 06:44:02 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 30 Mar 2010 06:44:02 -0700 Subject: Problem thermcopoly2 SNF 2010-03-16 16:40:13: PH3 FLOW Message-ID: Replaced PH3 MFC and checked operation From tberg at snf.stanford.edu Tue Mar 30 06:44:10 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 30 Mar 2010 06:44:10 -0700 Subject: Comment thermcopoly2 SNF 2010-03-17 11:25:49: Looking into flow issues Message-ID: Replaced PH3 MFC and checked operation From tberg at snf.stanford.edu Tue Mar 30 06:44:20 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 30 Mar 2010 06:44:20 -0700 Subject: Comment thermcopoly2 SNF 2010-03-17 12:40:12: Found gas table did not match MFC Message-ID: Replaced PH3 MFC and checked operation From tberg at snf.stanford.edu Tue Mar 30 06:44:29 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 30 Mar 2010 06:44:29 -0700 Subject: Problem thermcopoly2 SNF 2010-03-17 17:44:43: PH3 Message-ID: Replaced PH3 MFC and checked operation From tberg at snf.stanford.edu Tue Mar 30 06:44:37 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 30 Mar 2010 06:44:37 -0700 Subject: Comment thermcopoly2 SNF 2010-03-22 08:16:59: Waiting for PH3 MFC Message-ID: Replaced PH3 MFC and checked operation From tberg at snf.stanford.edu Tue Mar 30 06:44:46 2010 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 30 Mar 2010 06:44:46 -0700 Subject: Comment thermcopoly2 SNF 2010-03-29 13:49:23: replaced mfc Message-ID: Replaced PH3 MFC and checked operation From jrjain at snf.stanford.edu Tue Mar 30 10:01:09 2010 From: jrjain at snf.stanford.edu (jrjain at snf.stanford.edu) Date: Tue, 30 Mar 2010 10:01:09 -0700 Subject: Problem thermcopoly2 SNF 2010-03-30 10:01:08: Large Amount of Flaking... Message-ID: ..visible on the cantilever and boats. Time for a clean.