From sanjah at snf.stanford.edu Sun Feb 5 18:29:34 2006 From: sanjah at snf.stanford.edu (sanjah at snf.stanford.edu) Date: Sun, 5 Feb 2006 18:29:34 -0800 Subject: Problem tylan1 SNF 2006-02-05 18:29:34: Message-ID: the furnace door didn't close properly, the program did not run From sanjah at snf.stanford.edu Sun Feb 5 18:54:13 2006 From: sanjah at snf.stanford.edu (sanjah at snf.stanford.edu) Date: Sun, 5 Feb 2006 18:54:13 -0800 Subject: Shutdown tylan1 SNF 2006-02-05 18:54:13: Message-ID: the controller is not working and the door won't close, but the power is still on From tberg at snf.stanford.edu Mon Feb 6 07:01:56 2006 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 6 Feb 2006 07:01:56 -0800 Subject: Problem tylan1 SNF 2006-02-05 18:29:34: Message-ID: Worked fine From tberg at snf.stanford.edu Mon Feb 6 07:02:34 2006 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 6 Feb 2006 07:02:34 -0800 Subject: Shutdown tylan1 SNF 2006-02-05 18:54:13: Message-ID: Worked fine From okilic at snf.stanford.edu Sat Feb 11 14:35:25 2006 From: okilic at snf.stanford.edu (okilic at snf.stanford.edu) Date: Sat, 11 Feb 2006 14:35:25 -0800 Subject: Problem tylan1 SNF 2006-02-11 14:35:25: TCUI error Message-ID: Stays in StandBy mode, temperature shows > 4000 C. Does not allow to run receipe. From seymour at snf.stanford.edu Mon Feb 13 10:06:12 2006 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Mon, 13 Feb 2006 10:06:12 -0800 Subject: Problem tylan1 SNF 2006-02-11 14:35:25: TCUI error Message-ID: ran wet850 no problems From gladys at snf.stanford.edu Thu Feb 16 18:04:27 2006 From: gladys at snf.stanford.edu (gladys at snf.stanford.edu) Date: Thu, 16 Feb 2006 18:04:27 -0800 Subject: Problem tylan1 SNF 2006-02-16 18:04:26: I/O ERROR Message-ID: Tylan1 is showing I/O error From tberg at snf.stanford.edu Wed Feb 22 06:41:28 2006 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 22 Feb 2006 06:41:28 -0800 Subject: Shutdown tylan1 SNF 2006-02-22 06:41:26: Need 460 fan replaced Message-ID: From seymour at snf.stanford.edu Wed Feb 22 10:13:51 2006 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Wed, 22 Feb 2006 10:13:51 -0800 Subject: Shutdown tylan1 SNF 2006-02-22 06:41:26: Need 460 fan replaced Message-ID: replaced the fan and checked out system and MFc zero's were adjusted. From seymour at snf.stanford.edu Wed Feb 22 10:14:38 2006 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Wed, 22 Feb 2006 10:14:38 -0800 Subject: Problem tylan1 SNF 2006-02-16 18:04:26: I/O ERROR Message-ID: ted replaced slave computer powersupply. system is up. From tag at snf.stanford.edu Thu Feb 23 03:06:57 2006 From: tag at snf.stanford.edu (tag at snf.stanford.edu) Date: Thu, 23 Feb 2006 03:06:57 -0800 Subject: Problem tylan1 SNF 2006-02-23 03:06:56: no oxidization Message-ID: After 4hr oxidization using WET900, measured thickness of oxide was around 500A... From seymour at snf.stanford.edu Thu Feb 23 07:54:37 2006 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Thu, 23 Feb 2006 07:54:37 -0800 Subject: Problem tylan1 SNF 2006-02-23 03:06:56: no oxidization Message-ID: H2 interlock t/c connection loose. Thghtened t/c and checked operation. H2 flows now.