From latta at snf.stanford.edu Thu Jan 12 10:57:34 2006 From: latta at snf.stanford.edu (latta at snf.stanford.edu) Date: Thu, 12 Jan 2006 10:57:34 -0800 Subject: Problem tylan1 SNF 2006-01-12 10:57:31: gooey, melted stuff around door assemble.... Message-ID: gasket pewrhaps? From latta at snf.stanford.edu Thu Jan 12 10:59:34 2006 From: latta at snf.stanford.edu (latta at snf.stanford.edu) Date: Thu, 12 Jan 2006 10:59:34 -0800 Subject: Shutdown tylan1 SNF 2006-01-12 10:59:34: Source TC going nuts.... Message-ID: Soory, that's load TC. Reads 1000-915C while on 800C idle. From mdickey at snf.stanford.edu Thu Jan 12 14:00:45 2006 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Thu, 12 Jan 2006 14:00:45 -0800 Subject: Problem tylan1 SNF 2006-01-12 10:57:31: gooey, melted stuff around door assemble.... Message-ID: Cleaned door gasket material off of tube and door From tberg at snf.stanford.edu Thu Jan 12 15:02:11 2006 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Thu, 12 Jan 2006 15:02:11 -0800 Subject: Shutdown tylan1 SNF 2006-01-12 10:59:34: Source TC going nuts.... Message-ID: Replaced profile TC and entered cal numbers From duygu at snf.stanford.edu Mon Jan 16 12:19:37 2006 From: duygu at snf.stanford.edu (duygu at snf.stanford.edu) Date: Mon, 16 Jan 2006 12:19:37 -0800 Subject: Problem tylan1 SNF 2006-01-16 12:19:37: Message-ID: From duygu at snf.stanford.edu Mon Jan 16 12:23:38 2006 From: duygu at snf.stanford.edu (duygu at snf.stanford.edu) Date: Mon, 16 Jan 2006 12:23:38 -0800 Subject: Problem tylan1 SNF 2006-01-16 12:23:37: wafer piece fell down Message-ID: A small clean wafer piece fell down inside, close to the door of the furnace From mdickey at snf.stanford.edu Tue Jan 17 06:54:54 2006 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Tue, 17 Jan 2006 06:54:54 -0800 Subject: Shutdown tylan1 SNF 2006-01-17 06:54:53: sheath Message-ID: Need to replace broken cantilever sheath From mdickey at snf.stanford.edu Tue Jan 17 14:21:48 2006 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Tue, 17 Jan 2006 14:21:48 -0800 Subject: Shutdown tylan1 SNF 2006-01-17 06:54:53: sheath Message-ID: Replaced both sheaths, door gasket and removed broken wafers. Ready for use when temp stabilizes From mdickey at snf.stanford.edu Tue Jan 17 14:21:57 2006 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Tue, 17 Jan 2006 14:21:57 -0800 Subject: Problem tylan1 SNF 2006-01-16 12:23:37: wafer piece fell down Message-ID: noted From mdickey at snf.stanford.edu Tue Jan 17 14:22:25 2006 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Tue, 17 Jan 2006 14:22:25 -0800 Subject: Problem tylan1 SNF 2006-01-16 12:19:37: Message-ID: noted From cmfaulkn at snf.stanford.edu Mon Jan 23 11:07:19 2006 From: cmfaulkn at snf.stanford.edu (cmfaulkn at snf.stanford.edu) Date: Mon, 23 Jan 2006 11:07:19 -0800 Subject: Problem tylan1 SNF 2006-01-23 11:07:17: can't load recipes to tylan 1 Message-ID: Gives I/O error tbe 001 From seymour at snf.stanford.edu Mon Jan 23 11:42:51 2006 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Mon, 23 Jan 2006 11:42:51 -0800 Subject: Problem tylan1 SNF 2006-01-23 11:07:17: can't load recipes to tylan 1 Message-ID: powered down the slave comtputer and reset it when power back on. Loaded wet800 recipe and started ir. a after a couple of minutes I aborted the run and left the tube in ready. From ratiug at snf.stanford.edu Wed Jan 25 18:00:08 2006 From: ratiug at snf.stanford.edu (ratiug at snf.stanford.edu) Date: Wed, 25 Jan 2006 18:00:08 -0800 Subject: Problem tylan1 SNF 2006-01-25 18:00:05: a 3" wafer broken inside the furnace. Message-ID: Only half piece of 3" wafer was on the slot. See the other half inside the furnace. From mdickey at snf.stanford.edu Fri Jan 27 10:22:32 2006 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Fri, 27 Jan 2006 10:22:32 -0800 Subject: Problem tylan1 SNF 2006-01-25 18:00:05: a 3" wafer broken inside the furnace. Message-ID: broken piece removed