From seymour at snf.stanford.edu Mon Mar 2 11:19:04 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Mon, 2 Mar 2009 11:19:04 -0800 Subject: Shutdown tylan1 SNF 2009-02-28 00:29:12: door not closing Message-ID: replaced loader cable and loader motor From seymour at snf.stanford.edu Mon Mar 2 11:19:32 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Mon, 2 Mar 2009 11:19:32 -0800 Subject: Problem tylan1 SNF 2009-02-28 02:11:49: Door problem Message-ID: door closing and torquing down normally From seymour at snf.stanford.edu Mon Mar 2 11:20:20 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Mon, 2 Mar 2009 11:20:20 -0800 Subject: Problem tylan1 SNF 2009-02-28 02:13:57: Door problem Message-ID: fixed loader door problem with a cable replacement and loader motor replacement. From yeh at snf.stanford.edu Mon Mar 2 17:33:26 2009 From: yeh at snf.stanford.edu (yeh at snf.stanford.edu) Date: Mon, 2 Mar 2009 17:33:26 -0800 Subject: Problem tylan1 SNF 2009-03-02 17:33:26: found clean vac tweezer in broken state Message-ID: button and slider valve missing. taped openings for temporary operation. From latta at snf.stanford.edu Tue Mar 3 09:55:14 2009 From: latta at snf.stanford.edu (latta at snf.stanford.edu) Date: Tue, 3 Mar 2009 09:55:14 -0800 Subject: Problem tylan1 SNF 2009-02-27 23:54:43: No Oxide? Message-ID: probably a door issue- has been addressed From latta at snf.stanford.edu Tue Mar 3 09:55:29 2009 From: latta at snf.stanford.edu (latta at snf.stanford.edu) Date: Tue, 3 Mar 2009 09:55:29 -0800 Subject: Problem tylan1 SNF 2009-02-27 16:22:56: tube doesn't come out in the end of the process Message-ID: motor replaced From seymour at snf.stanford.edu Tue Mar 10 08:47:11 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Tue, 10 Mar 2009 08:47:11 -0700 Subject: Problem tylan1 SNF 2009-03-02 17:33:26: found clean vac tweezer in broken state Message-ID: there are no problems with either vac wand on furnace bank 1. From maurice at snf.stanford.edu Wed Mar 18 10:19:38 2009 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 18 Mar 2009 10:19:38 -0700 Subject: Comment tylan1 SNF 2009-03-18 10:19:38: tlc clean Message-ID: last night From emyers at snf.stanford.edu Wed Mar 18 14:06:14 2009 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Wed, 18 Mar 2009 14:06:14 -0700 Subject: Comment tylan1 SNF 2009-03-18 14:06:14: March Quals, Ran 3/9/09 Message-ID: WET900 00:39:00 50 wafer spread (expect about 920A) Front = 826A, Std Dev = 3.8 Front Center = 822A, Std Dev = 2.6 Back Center = 825A, Std Dev = 2.7 Back = 834A, Std Dev = 1.9 Average All = 827A From masaharu at snf.stanford.edu Fri Mar 20 13:48:56 2009 From: masaharu at snf.stanford.edu (masaharu at snf.stanford.edu) Date: Fri, 20 Mar 2009 13:48:56 -0700 Subject: Comment tylan1 SNF 2009-03-20 13:48:55: found the tube in ready mode at 500degC Message-ID: I found the tube in ready mode at 500degC. The tube has to be back to 800degC. From bchui at snf.stanford.edu Thu Mar 26 18:47:31 2009 From: bchui at snf.stanford.edu (bchui at snf.stanford.edu) Date: Thu, 26 Mar 2009 18:47:31 -0700 Subject: Problem tylan1 SNF 2009-03-26 18:47:30: Wand is chipped Message-ID: The quartz piece has a major chunk missing. Use with caution. From damodei at snf.stanford.edu Fri Mar 27 01:50:07 2009 From: damodei at snf.stanford.edu (damodei at snf.stanford.edu) Date: Fri, 27 Mar 2009 01:50:07 -0700 Subject: Problem tylan1 SNF 2009-03-27 01:50:06: Quartz vacuum wand DETACHED Message-ID: When I went to the machine I found the quartz piece detached from the wand and sitting in pieces on the table. Loaded wafers w/ plastic tweezers. From tberg at snf.stanford.edu Fri Mar 27 10:37:45 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 27 Mar 2009 10:37:45 -0700 Subject: Problem tylan1 SNF 2009-03-26 18:47:30: Wand is chipped Message-ID: Replaced wand From tberg at snf.stanford.edu Fri Mar 27 10:37:57 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 27 Mar 2009 10:37:57 -0700 Subject: Problem tylan1 SNF 2009-03-27 01:50:06: Quartz vacuum wand DETACHED Message-ID: Replaced wand From tberg at snf.stanford.edu Fri Mar 27 10:38:32 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Fri, 27 Mar 2009 10:38:32 -0700 Subject: Comment tylan1 SNF 2009-03-20 13:48:55: found the tube in ready mode at 500degC Message-ID: See Maurice message