From bipin at stanford.edu Sat Mar 6 09:37:45 2004 From: bipin at stanford.edu (Bipin Rajendran) Date: Sat, 6 Mar 2004 09:37:45 -0800 Subject: Clean and Oxidation Message-ID: <041d01c403a1$bc1160d0$42b20c80@supernova> Dear Labmembers, I will be running a TCA clean followed by a gate oxide growth on monday morning (8 Feb), starting 6AM. I hope this is not going to tie up anyone else's processing that day. Thanks Bipin -------------- next part -------------- An HTML attachment was scrubbed... URL: From cm_richter at att.net Wed Mar 10 13:23:10 2004 From: cm_richter at att.net (cm_richter at att.net) Date: Wed, 10 Mar 2004 21:23:10 +0000 Subject: cancelled reservation today on Tylan2 4pm to 11am Message-ID: <031020042123.25607.7505@att.net> Sorry for the late notice. From cm_richter at att.net Mon Mar 15 12:27:01 2004 From: cm_richter at att.net (cm_richter at att.net) Date: Mon, 15 Mar 2004 20:27:01 +0000 Subject: Cancelled Reservation on Tylan2 5pm to 10am tonight Message-ID: <031520042027.16425.c3f@att.net> From seymour at snf.stanford.edu Mon Mar 22 11:38:11 2004 From: seymour at snf.stanford.edu (Ray Seymour) Date: Mon, 22 Mar 2004 11:38:11 -0800 Subject: MFS alarms Message-ID: <405F40A3.54178247@snf.stanford.edu> To Tylan users, When you experience an alarm condition on a tube the front panel will show MFS Alarm. If possible at this time go to the back room and look at the gas jungle controller for that tube and it will show the gas or interlock condition that triggered the alarm mode on the display. Including this information in the coral and the tube alarm status book for each tube will allow maintenance to have a direction to trouble shoot the condition. This is especially important with after hours alarm conditions when maintenance cannot inquire about the triggering event. Thanks for your efforts in providing this information in your coral equipment messages. Ray Seymour Diffusion equipment technician 7247425 From wangqian at stanford.edu Wed Mar 24 18:51:29 2004 From: wangqian at stanford.edu (Qian Wang) Date: Wed, 24 Mar 2004 18:51:29 -0800 (PST) Subject: Furnace clean Message-ID: Hi tylan2 users, I am running furnace cleaning program overnight for gate oxide tomorrow morning. Please do not disturb it. Sorry for any inconvenience. Thanks. qian