From latta at snf.stanford.edu  Tue Dec  1 17:44:32 2009
From: latta at snf.stanford.edu (latta at snf.stanford.edu)
Date: Tue, 1 Dec 2009 17:44:32 -0800
Subject: Comment tylan4 SNF 2009-12-01 17:44:32: Dec quals
Message-ID: <mailman.470.1357938854.25973.tylan4-pcs@snf.stanford.edu>

WET900  00:39:00  50 wafer spread
  (expect about 920A)
Front = 947A, Std Dev = 7.2
Back = 968A, Std Dev = 5.7
Average All = 958A



From latta at snf.stanford.edu  Tue Dec  1 17:44:42 2009
From: latta at snf.stanford.edu (latta at snf.stanford.edu)
Date: Tue, 1 Dec 2009 17:44:42 -0800
Subject: Comment tylan4 SNF 2009-11-05 17:39:42: Nov quals
Message-ID: <mailman.471.1357938854.25973.tylan4-pcs@snf.stanford.edu>

archived



From mrlin at snf.stanford.edu  Fri Dec  4 14:32:51 2009
From: mrlin at snf.stanford.edu (mrlin at snf.stanford.edu)
Date: Fri, 4 Dec 2009 14:32:51 -0800
Subject: Problem tylan4 SNF 2009-12-04 14:32:50: boating cable breaking
Message-ID: <mailman.472.1357938854.25973.tylan4-pcs@snf.stanford.edu>

the cable is breaking, inner side (away from user), about 1 foot from the furnace opening when fully boated out.



From seymour at snf.stanford.edu  Fri Dec  4 15:17:00 2009
From: seymour at snf.stanford.edu (seymour at snf.stanford.edu)
Date: Fri, 4 Dec 2009 15:17:00 -0800
Subject: Problem tylan4 SNF 2009-12-04 14:32:50: boating cable breaking
Message-ID: <mailman.473.1357938854.25973.tylan4-pcs@snf.stanford.edu>

replaced loader drive cable and checked loader operation, it was ok and drive shutdown after timeout when door in sensor made.