From maurice at snf.stanford.edu Thu Jan 7 11:09:32 2010 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Thu, 7 Jan 2010 11:09:32 -0800 Subject: Comment tylan5 SNF 2010-01-07 11:09:31: tube good Message-ID: pnataraj reports that tylan5 is working fine after the shutdown From khoang at snf.stanford.edu Wed Jan 13 15:46:28 2010 From: khoang at snf.stanford.edu (khoang at snf.stanford.edu) Date: Wed, 13 Jan 2010 15:46:28 -0800 Subject: Problem tylan5 SNF 2010-01-13 15:46:28: MFS alarm: due to O2Hi flow Message-ID: It also started flowing about 40 during my depostion, when O2Hi was set to zero in the prog. From seymour at snf.stanford.edu Thu Jan 14 07:42:14 2010 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Thu, 14 Jan 2010 07:42:14 -0800 Subject: Problem tylan5 SNF 2010-01-13 15:46:28: MFS alarm: due to O2Hi flow Message-ID: checked and adjusted all MFC zero's. Did auto zero routine. Checked to assure all MFC flowed to setpoint. All ok at this time. From maurice at snf.stanford.edu Tue Jan 19 09:54:44 2010 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Tue, 19 Jan 2010 09:54:44 -0800 Subject: Shutdown tylan5 SNF 2010-01-19 09:54:43: heating up after power outage Message-ID: From maurice at snf.stanford.edu Tue Jan 19 11:38:54 2010 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Tue, 19 Jan 2010 11:38:54 -0800 Subject: Shutdown tylan5 SNF 2010-01-19 09:54:43: heating up after power outage Message-ID: temp up