From maurice at snf.stanford.edu  Thu Sep  8 11:39:11 2005
From: maurice at snf.stanford.edu (maurice at snf.stanford.edu)
Date: Thu, 8 Sep 2005 11:39:11 -0700
Subject: Shutdown tylan6 SNF 2005-08-15 06:18:07: Shutdown for bank 4 move
Message-ID: <mailman.86.1356283696.4992.tylan6-pcs@snf.stanford.edu>

after shutdown...need test



From maurice at snf.stanford.edu  Thu Sep  8 11:39:29 2005
From: maurice at snf.stanford.edu (maurice at snf.stanford.edu)
Date: Thu, 8 Sep 2005 11:39:29 -0700
Subject: Problem tylan6 SNF 2005-09-08 11:39:28: after shutdown...need test
Message-ID: <mailman.87.1356283696.4992.tylan6-pcs@snf.stanford.edu>

after shutdown...need test



From maurice at snf.stanford.edu  Thu Sep 15 09:29:06 2005
From: maurice at snf.stanford.edu (maurice at snf.stanford.edu)
Date: Thu, 15 Sep 2005 09:29:06 -0700
Subject: Problem tylan6 SNF 2005-09-08 11:39:28: after shutdown...need test
Message-ID: <mailman.88.1356283696.4992.tylan6-pcs@snf.stanford.edu>

Maurice,
I ran PCL1000 for 90 minutes today. On
a p-type dummy I measured 2.36 Ohms/sqr
which is good. I think you can consider
this as a test and remove the yellow light.
Sanli