From latta at snf.stanford.edu Tue Mar 1 15:06:58 2011 From: latta at snf.stanford.edu (latta at snf.stanford.edu) Date: Tue, 1 Mar 2011 15:06:58 -0800 Subject: Shutdown tylanfga SNF 2011-03-01 15:06:57: All 3 TCs at 250 Message-ID: with no power showing. FGA400 program loaded. From tberg at snf.stanford.edu Wed Mar 2 14:22:09 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 2 Mar 2011 14:22:09 -0800 Subject: Shutdown tylanfga SNF 2011-03-01 15:06:57: All 3 TCs at 250 Message-ID: replaced tcu board it is controlloing nicely at 400 From tberg at snf.stanford.edu Wed Mar 2 14:23:01 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 2 Mar 2011 14:23:01 -0800 Subject: Problem tylanfga SNF 2011-02-26 16:19:04: temperature problem Message-ID: replaced tcu board it is controlling nicely at 400 From hongyuc at snf.stanford.edu Sat Mar 5 00:17:19 2011 From: hongyuc at snf.stanford.edu (hongyuc at snf.stanford.edu) Date: Sat, 5 Mar 2011 00:17:19 -0800 Subject: Problem tylanfga SNF 2011-03-05 00:17:19: thermal couple Message-ID: the input and output temperature are not the same. I think it results from thermal couple... In addtion, the tube was not so hot thougth the tycom indicated it is 400C.... From luckys at snf.stanford.edu Sat Mar 5 14:47:20 2011 From: luckys at snf.stanford.edu (luckys at snf.stanford.edu) Date: Sat, 5 Mar 2011 14:47:20 -0800 Subject: Problem tylanfga SNF 2011-03-05 14:47:19: FGA Heating problem Message-ID: The furnace is not heating and the display is not working. Can you please fix it as soon as possible? From jcdoll at snf.stanford.edu Sun Mar 6 08:54:20 2011 From: jcdoll at snf.stanford.edu (jcdoll at snf.stanford.edu) Date: Sun, 6 Mar 2011 08:54:20 -0800 Subject: Shutdown tylanfga SNF 2011-03-06 08:54:20: TCU error Message-ID: echo the previous two users... TCU reads 0 and the furnace isn't heating at all, so is not usable. From tberg at snf.stanford.edu Mon Mar 7 08:57:50 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 7 Mar 2011 08:57:50 -0800 Subject: Shutdown tylanfga SNF 2011-03-06 08:54:20: TCU error Message-ID: Reset TCU, loaded fga400- controlling fine at this time. From tberg at snf.stanford.edu Mon Mar 7 08:58:04 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 7 Mar 2011 08:58:04 -0800 Subject: Problem tylanfga SNF 2011-03-05 00:17:19: thermal couple Message-ID: Reset TCU, loaded fga400- controlling fine at this time. From tberg at snf.stanford.edu Mon Mar 7 08:58:13 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 7 Mar 2011 08:58:13 -0800 Subject: Problem tylanfga SNF 2011-03-05 14:47:19: FGA Heating problem Message-ID: Reset TCU, loaded fga400- controlling fine at this time. From maurice at snf.stanford.edu Mon Mar 7 10:40:24 2011 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Mon, 7 Mar 2011 10:40:24 -0800 Subject: Shutdown tylanfga SNF 2011-03-07 10:40:24: TCU error 81 Message-ID: Labuser Luckys reports thet when he loaded recipe FGA300 the system showed TCU 81, "250?" on all three zones on the tycom, and temp=0000 on the LED dispay From tberg at snf.stanford.edu Mon Mar 7 12:10:20 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 7 Mar 2011 12:10:20 -0800 Subject: Shutdown tylanfga SNF 2011-03-07 10:40:24: TCU error 81 Message-ID: Replaced TCU board again now it is controlling At 300. Ted From jcdoll at snf.stanford.edu Wed Mar 16 08:32:33 2011 From: jcdoll at snf.stanford.edu (jcdoll at snf.stanford.edu) Date: Wed, 16 Mar 2011 08:32:33 -0700 Subject: Problem tylanfga SNF 2011-03-16 08:32:32: temp control issues Message-ID: TCU% is all over the map. i'm running FGA400 and the temperatures are 432/422/437 at the L/C/S positions. the tube had been idling at 400C before I started the run. From seymour at snf.stanford.edu Thu Mar 17 07:12:12 2011 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Thu, 17 Mar 2011 07:12:12 -0700 Subject: Problem tylanfga SNF 2011-03-16 08:32:32: temp control issues Message-ID: ran backup t/c calibration 250 to 650. It has completed. From tberg at snf.stanford.edu Tue Mar 22 12:11:57 2011 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 22 Mar 2011 12:11:57 -0700 Subject: Comment tylanfga SNF 2011-03-22 12:11:56: Reseated Neon display Message-ID: Display is working now