From beckwith at snf.stanford.edu Fri Nov 2 13:01:59 2001 From: beckwith at snf.stanford.edu (Sharleen Beckwith) Date: Fri, 2 Nov 2001 13:01:59 -0800 Subject: metal and non-metal wands In-Reply-To: References: Message-ID: Is there any way to figure out whether the tubes are now metal contaminated? I guess tylanbpsg is safe because it was down and being cleaned during the wand-swap? Some of us worry about these things. >Delivered-To: beckwith at snf.stanford.edu >Mailing-List: contact tylanbpsg-help at snf.stanford.edu; run by ezmlm >X-No-Archive: yes >List-Post: >List-Help: >List-Unsubscribe: >List-Subscribe: >Delivered-To: mailing list tylanbpsg at snf.stanford.edu >Date: Fri, 2 Nov 2001 10:30:02 -0800 (PST) >From: Nancy Latta >To: Sanli Ergun >cc: tylannitride at snf.stanford.edu, tylanpoly at snf.stanford.edu, > tylanbpsg at snf.stanford.edu >Subject: Re: metal and non-metal wands > >Folks, > >Mike has cleaned and replaced the nonmetal wand tip. He also has put a >label on the wand handle indicating it is nonmetal. > >Fell free to use the wands again. > > Nancy Do you mean it has been replaced with a new, clean, tip, or the old one was cleaned? Because I don't see how you can clean metal off of those tips since there is a metal rod imbedded in the quartz. >Delivered-To: beckwith at snf.stanford.edu >Mailing-List: contact tylanbpsg-help at snf.stanford.edu; run by ezmlm >X-No-Archive: yes >List-Post: >List-Help: >List-Unsubscribe: >List-Subscribe: >Delivered-To: mailing list tylanbpsg at snf.stanford.edu >Date: Tue, 30 Oct 2001 09:48:12 -0800 >From: Mike Dickey >X-Accept-Language: en >To: tylanbpsg at snf.stanford.edu, tylan at pcs.stanford.edu >Subject: Pull and Clean > >We are going to put the BPSG tube down for a pull and clean tomorrow morning. Sharleen P. S. Thanks to Sanli for catching this and quickly reporting it! From amol at stanford.edu Tue Nov 13 15:53:05 2001 From: amol at stanford.edu (Amol Joshi) Date: Tue, 13 Nov 2001 15:53:05 -0800 (PST) Subject: long anneal notice Message-ID: Hi tylanfga-users, I am planning to use tylanfga for long anneals (48hours) starting Wednesday (11/14) morning. If that interferes with your schedule, please let me know soon. Thanks, - Amol From amol at stanford.edu Tue Nov 27 12:44:47 2001 From: amol at stanford.edu (Amol Joshi) Date: Tue, 27 Nov 2001 12:44:47 -0800 (PST) Subject: long anneal notice Message-ID: Hi FGA users, I am planning to start a 48 hour anneal in tylanfga starting from 6:30pm Wednesday. If you have conflicts please let me know ASAP. Thanks, - Amol