From tberg at snf.stanford.edu Thu Aug 14 06:31:30 2003 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Aug 14, 2003 6:31:30 AM Subject: Shutdown tylanpoly 2003-08-14 06:31:29: Report Shutdown for tylanpoly Message-ID: burnbox pressure high From tberg at snf.stanford.edu Thu Aug 14 06:53:54 2003 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Aug 14, 2003 6:53:54 AM Subject: Shutdown tylanpoly 2003-08-14 06:31:29: Report Clear for tylanpoly Message-ID: cleaned burn box From lindaw at snf.stanford.edu Wed Aug 27 12:17:10 2003 From: lindaw at snf.stanford.edu (lindaw at snf.stanford.edu) Date: Aug 27, 2003 12:17:10 PM Subject: Problem tylanpoly 2003-08-27 12:17:09: n2 backfill MFS alarm reading negative flow Message-ID: From mdickey at snf.stanford.edu Wed Aug 27 01:37:00 2003 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Aug 27, 2003 1:37:00 PM Subject: Problem tylanpoly 2003-08-27 12:17:09: Report Clear for tylanpoly Message-ID: Zero'd out the 460 controller. Ready for use From mdickey at snf.stanford.edu Wed Aug 27 02:21:40 2003 From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu) Date: Aug 27, 2003 2:21:40 PM Subject: Shutdown tylanpoly 2003-08-27 14:21:39: Report Shutdown for tylanpoly Message-ID: MFS 460 is not controlling N2 backfill. Will check it out in the morning From seymour at snf.stanford.edu Thu Aug 28 08:12:40 2003 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Aug 28, 2003 8:12:40 AM Subject: Shutdown tylanpoly 2003-08-27 14:21:39: Report Clear for tylanpoly Message-ID: sensor for backfil MFC open on one side. Replaced the sensor and adjusted zero, then ran auto zero routing on MFS460. Pumped tube down and checked flow. It was ok. Tube is up.