From chienyuc at snf.stanford.edu Tue Aug 4 13:47:57 2009 From: chienyuc at snf.stanford.edu (chienyuc at snf.stanford.edu) Date: Tue, 4 Aug 2009 13:47:57 -0700 Subject: Comment tylanpoly SNF 2009-08-04 13:47:56: Front panel display dim Message-ID: Sometimes during process the front panel display became very dim. From lindaw at snf.stanford.edu Mon Aug 10 10:35:27 2009 From: lindaw at snf.stanford.edu (lindaw at snf.stanford.edu) Date: Mon, 10 Aug 2009 10:35:27 -0700 Subject: Problem tylanpoly SNF 2009-08-10 10:35:27: center TC small "b" Message-ID: From tberg at snf.stanford.edu Tue Aug 11 06:03:44 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Tue, 11 Aug 2009 06:03:44 -0700 Subject: Shutdown tylanpoly SNF 2009-08-11 06:03:42: pull and clean Message-ID: Scheduled pull and clean From seymour at snf.stanford.edu Wed Aug 12 07:19:33 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Wed, 12 Aug 2009 07:19:33 -0700 Subject: Shutdown tylanpoly SNF 2009-08-11 06:03:42: pull and clean Message-ID: clean completed. cold and hot leak check good, starting a coat run From seymour at snf.stanford.edu Wed Aug 12 07:20:48 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Wed, 12 Aug 2009 07:20:48 -0700 Subject: Problem tylanpoly SNF 2009-08-10 10:35:27: center TC small "b" Message-ID: there are no "b/B" on the tool From seymour at snf.stanford.edu Wed Aug 12 07:21:06 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Wed, 12 Aug 2009 07:21:06 -0700 Subject: Problem tylanpoly SNF 2009-08-12 07:21:06: will need test after coat Message-ID: From seymour at snf.stanford.edu Wed Aug 12 08:29:49 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Wed, 12 Aug 2009 08:29:49 -0700 Subject: Shutdown tylanpoly SNF 2009-08-12 08:29:49: thermocuple issues Message-ID: From seymour at snf.stanford.edu Wed Aug 12 10:24:59 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Wed, 12 Aug 2009 10:24:59 -0700 Subject: Shutdown tylanpoly SNF 2009-08-12 08:29:49: thermocuple issues Message-ID: replaced profile t/c. started coat run From maurice at snf.stanford.edu Wed Aug 12 15:44:13 2009 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 12 Aug 2009 15:44:13 -0700 Subject: Problem tylanpoly SNF 2009-08-12 07:21:06: will need test after coat Message-ID: Test complete POLYEMIT 00:10:00 expected~1200Ang actual 1149 good test From maurice at snf.stanford.edu Wed Aug 12 15:44:26 2009 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 12 Aug 2009 15:44:26 -0700 Subject: Comment tylanpoly SNF 2009-08-04 13:47:56: Front panel display dim Message-ID: logged From maurice at snf.stanford.edu Wed Aug 12 15:45:32 2009 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 12 Aug 2009 15:45:32 -0700 Subject: Comment tylanpoly SNF 2009-07-04 14:11:26: need to push boat in to get door interlock Message-ID: working normal after pull and clean From popomoo at snf.stanford.edu Thu Aug 20 14:09:07 2009 From: popomoo at snf.stanford.edu (popomoo at snf.stanford.edu) Date: Thu, 20 Aug 2009 14:09:07 -0700 Subject: Problem tylanpoly SNF 2009-08-20 14:09:06: Vacuum tweezer(?) was broken Message-ID: I pushed vacuum tweezer too hard to its socket, and it crashed the wall, was broken. Sorry about that. From seymour at snf.stanford.edu Thu Aug 20 14:26:29 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Thu, 20 Aug 2009 14:26:29 -0700 Subject: Problem tylanpoly SNF 2009-08-20 14:09:06: Vacuum tweezer(?) was broken Message-ID: replaced vacuum wand. From kupnik at snf.stanford.edu Sat Aug 29 18:08:59 2009 From: kupnik at snf.stanford.edu (kupnik at snf.stanford.edu) Date: Sat, 29 Aug 2009 18:08:59 -0700 Subject: Problem tylanpoly SNF 2009-08-29 18:08:59: tube needs help to boat out Message-ID: There seem to be a position sensor problem. After venting, and loading the recipe the boat does not come out. You need to abort, go into manual and boat out about 10 cm. Then when you hit run again, everything works fine. From seymour at snf.stanford.edu Mon Aug 31 08:46:10 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Mon, 31 Aug 2009 08:46:10 -0700 Subject: Problem tylanpoly SNF 2009-08-29 18:08:59: tube needs help to boat out Message-ID: vented tube and loaded polyemit. pushed run and tube opened. pushed alarm ack and loader went back in. tube now running polypump at this time.