From lindaw at snf.stanford.edu Mon Mar 9 11:24:21 2009 From: lindaw at snf.stanford.edu (lindaw at snf.stanford.edu) Date: Mon, 9 Mar 2009 11:24:21 -0700 Subject: Problem tylanpoly SNF 2009-03-09 11:24:21: display is random numbers Message-ID: Tube display was reading step 25. I pushed alarm acknowledge, but the alarm did not go off and the display just showed some random number. pushing abort, or the read or status buttons only changes some digit of the random number displayed. Something is effed up here. Help? From maurice at snf.stanford.edu Mon Mar 9 11:31:08 2009 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Mon, 9 Mar 2009 11:31:08 -0700 Subject: Shutdown tylanpoly SNF 2009-03-09 11:31:07: I/O error Message-ID: From seymour at snf.stanford.edu Tue Mar 10 08:31:47 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Tue, 10 Mar 2009 08:31:47 -0700 Subject: Problem tylanpoly SNF 2009-03-09 11:24:21: display is random numbers Message-ID: display reading ok after resetting slave computer From seymour at snf.stanford.edu Tue Mar 10 08:34:14 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Tue, 10 Mar 2009 08:34:14 -0700 Subject: Shutdown tylanpoly SNF 2009-03-09 11:31:07: I/O error Message-ID: Slave was locked up. loaded polypump and ran recipe and all was ok. checked slave powersupply voltages, 5 volts was 5.02 plus 12 volts was 11.9 volts and - 12 volts was -12.0 volts, all normal. From yeh at snf.stanford.edu Wed Mar 11 10:43:53 2009 From: yeh at snf.stanford.edu (yeh at snf.stanford.edu) Date: Wed, 11 Mar 2009 10:43:53 -0700 Subject: Problem tylanpoly SNF 2009-03-11 10:43:52: no response from tycom keyboard Message-ID: From seymour at snf.stanford.edu Wed Mar 11 11:11:13 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Wed, 11 Mar 2009 11:11:13 -0700 Subject: Problem tylanpoly SNF 2009-03-11 10:43:52: no response from tycom keyboard Message-ID: checked tycom and keyboard working. found date and time indicating a tycom rebooted. Entered correct time and date. From seymour at snf.stanford.edu Wed Mar 11 11:14:14 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Wed, 11 Mar 2009 11:14:14 -0700 Subject: Problem tylanpoly SNF 2009-02-18 17:28:21: Qual test a little thicker than normal Message-ID: system is being used. From seymour at snf.stanford.edu Wed Mar 11 11:14:42 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Wed, 11 Mar 2009 11:14:42 -0700 Subject: Comment tylanpoly SNF 2009-02-17 09:04:52: changed pump oil Message-ID: noted From elvislin at snf.stanford.edu Thu Mar 19 15:58:53 2009 From: elvislin at snf.stanford.edu (elvislin at snf.stanford.edu) Date: Thu, 19 Mar 2009 15:58:53 -0700 Subject: Problem tylanpoly SNF 2009-03-19 15:58:53: mfs alarm at step 15! Message-ID: From tberg at snf.stanford.edu Mon Mar 30 06:32:45 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 30 Mar 2009 06:32:45 -0700 Subject: Problem tylanpoly SNF 2009-03-19 15:58:53: mfs alarm at step 15! Message-ID: noted From seymour at snf.stanford.edu Tue Mar 31 09:13:34 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Tue, 31 Mar 2009 09:13:34 -0700 Subject: Comment tylanpoly SNF 2009-03-31 09:13:34: oil change completed Message-ID: