From mdickey at snf.stanford.edu  Fri Mar  1 12:37:21 2002
From: mdickey at snf.stanford.edu (Mike Dickey)
Date: Fri, 01 Mar 2002 12:37:21 -0800
Subject: Tube thickness
Message-ID: <3C7FE681.3135C649@snf.stanford.edu>

The tube will be pulled and cleaned on monday morning. Passed normal
clean thickness, use at own discretion.



From seymour at snf.stanford.edu  Mon Mar 11 08:36:01 2002
From: seymour at snf.stanford.edu (Ray Seymour)
Date: Mon, 11 Mar 2002 08:36:01 -0800
Subject: Silane shutdown
Message-ID: <3C8CDCF1.1C664CF6@snf.stanford.edu>

The silane cylinder ran out over the weekend and has been replaced and
is on leak check til tomorrow morning.



From tberg at snf.stanford.edu  Tue Mar 12 14:37:49 2002
From: tberg at snf.stanford.edu (Ted Berg)
Date: Tue, 12 Mar 2002 14:37:49 -0800
Subject: House gas shutdown
Message-ID: <3C8E833D.28BF7C8B@snf.stanford.edu>

Greetings everyone,
    Next week on Tuesday morning at approximately 7:00am we will be
shutting down house gases to all of the above tubes:tylan5,tylan6,
tylan7, tylan8, tylanpoly, tylannitride, tylanbpsg,tylanfga,
teos,tystar1.  This will be to reorient gas lines for the THermco
install.  Please try and have runs completed by that time. Gases will be
off for most of the day and then turned back on.  Thanks in advance for
your help.  ted



From tberg at snf.stanford.edu  Fri Mar 15 15:06:28 2002
From: tberg at snf.stanford.edu (Ted Berg)
Date: Fri, 15 Mar 2002 15:06:28 -0800
Subject: House gas shutdown
References: <3C8E833D.28BF7C8B@snf.stanford.edu>
Message-ID: <3C927E74.B3F67FE7@snf.stanford.edu>

JUst in case someone is not sure which gases are house gases, they include:
N2,O2,H2,Clean dry air, Argon.  We will also loose cooling water to
banks,2,3,4.

Ted Berg wrote:

> Greetings everyone,
>     Next week on Tuesday morning at approximately 7:00am we will be
> shutting down house gases to all of the above tubes:tylan5,tylan6,
> tylan7, tylan8, tylanpoly, tylannitride, tylanbpsg,tylanfga,
> teos,tystar1.  This will be to reorient gas lines for the THermco
> install.  Please try and have runs completed by that time. Gases will be
> off for most of the day and then turned back on.  Thanks in advance for
> your help.  ted



From tberg at snf.stanford.edu  Thu Mar 28 13:47:24 2002
From: tberg at snf.stanford.edu (Ted Berg)
Date: Thu, 28 Mar 2002 13:47:24 -0800
Subject: Problems with tylan ploy
Message-ID: <3CA38F6C.326D6250@snf.stanford.edu>

Hello all,
     After Evelyn's run we checked the tube and did not find any issues
with temperatures or gas flows.ted