From seymour at snf.stanford.edu  Thu Jan  2 11:37:32 2003
From: seymour at snf.stanford.edu (Ray Seymour)
Date: Thu, 02 Jan 2003 11:37:32 -0800
Subject: Tube coat and test 
Message-ID: <3E1494FC.924116E7@snf.stanford.edu>

I ran polycoat this morning to coat the tube after pull and clean and to
test operation after shutdown.



From rcrane at snf.stanford.edu  Wed Jan 15 12:07:11 2003
From: rcrane at snf.stanford.edu (Dick Crane)
Date: Wed, 15 Jan 2003 12:07:11 -0800
Subject: Silane bottle
Message-ID: <3E25BF6F.A54258B0@snf.stanford.edu>

All,

The furnace silane gas consumption rate has increased
in the last few days and next week's cylinder change has been moved up
to Thursday, 1/16/03, at 0600. This early change will ensure
uninterrupted silane service over the three day weekend. The furnaces
will be back up on Friday, 1/17/03, at 0600. Maintenance has reserved
the furnaces for this 24 hr. time slot.

What happened to the automatic system Dick promised?  Our automatic
changeover valving has been built and is ready for installation. Since
silane is pyrophoric, full county permitting protocol must be followed.
The project is presently in permitting, but we should be ready for
installation at the next cylinder change.

Thanks,

Dick





From mdickey at snf.stanford.edu  Tue Jan 21 07:14:25 2003
From: mdickey at snf.stanford.edu (Mike Dickey)
Date: Tue, 21 Jan 2003 07:14:25 -0800
Subject: Poly thickness
Message-ID: <3E2D63D1.6FCC3104@snf.stanford.edu>

To all concerned users:

The Poly tube has 26.5 microns. At 30 microns we do a pull and clean.
Please schedule accordingly.