From tberg at snf.stanford.edu  Tue Jan  3 12:58:58 2006
From: tberg at snf.stanford.edu (tberg at snf.stanford.edu)
Date: Tue, 3 Jan 2006 12:58:58 -0800
Subject: Comment tylansige SNF 2006-01-03 12:58:57: Gases purged out
Message-ID: <mailman.309.1356283828.5077.tylansige-pcs@snf.stanford.edu>

Gases purged out to install blanks in VMB



From tberg at snf.stanford.edu  Wed Jan 11 13:46:58 2006
From: tberg at snf.stanford.edu (tberg at snf.stanford.edu)
Date: Wed, 11 Jan 2006 13:46:58 -0800
Subject: Comment tylansige SNF 2006-01-03 12:58:57: Gases purged out
Message-ID: <mailman.310.1356283828.5077.tylansige-pcs@snf.stanford.edu>

noted



From aokyay at snf.stanford.edu  Sun Jan 15 19:39:26 2006
From: aokyay at snf.stanford.edu (aokyay at snf.stanford.edu)
Date: Sun, 15 Jan 2006 19:39:26 -0800
Subject: Shutdown tylansige SNF 2006-01-15 19:39:25: program error
Message-ID: <mailman.311.1356283828.5077.tylansige-pcs@snf.stanford.edu>

no I/O, no response, reads "program error" on the display



From aokyay at snf.stanford.edu  Tue Jan 17 18:21:16 2006
From: aokyay at snf.stanford.edu (aokyay at snf.stanford.edu)
Date: Tue, 17 Jan 2006 18:21:16 -0800
Subject: Problem tylansige SNF 2006-01-17 18:21:16: bad thermocouple
Message-ID: <mailman.312.1356283828.5077.tylansige-pcs@snf.stanford.edu>

load side reads 510b



From mdickey at snf.stanford.edu  Wed Jan 18 06:46:08 2006
From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu)
Date: Wed, 18 Jan 2006 06:46:08 -0800
Subject: Problem tylansige SNF 2006-01-17 18:21:16: bad thermocouple
Message-ID: <mailman.313.1356283828.5077.tylansige-pcs@snf.stanford.edu>

Repaired broken t.c. connections



From tberg at snf.stanford.edu  Wed Jan 18 13:09:18 2006
From: tberg at snf.stanford.edu (tberg at snf.stanford.edu)
Date: Wed, 18 Jan 2006 13:09:18 -0800
Subject: Shutdown tylansige SNF 2006-01-15 19:39:25: program error
Message-ID: <mailman.314.1356283828.5077.tylansige-pcs@snf.stanford.edu>

Replaced 4 fuses in system and loaded pump program



From tberg at snf.stanford.edu  Wed Jan 18 13:10:58 2006
From: tberg at snf.stanford.edu (tberg at snf.stanford.edu)
Date: Wed, 18 Jan 2006 13:10:58 -0800
Subject: Problem tylansige SNF 2005-12-06 16:08:46: Silane leak alarm
Message-ID: <mailman.315.1356283828.5077.tylansige-pcs@snf.stanford.edu>

Noted



From pethe at snf.stanford.edu  Thu Jan 19 17:29:26 2006
From: pethe at snf.stanford.edu (pethe at snf.stanford.edu)
Date: Thu, 19 Jan 2006 17:29:26 -0800
Subject: Shutdown tylansige SNF 2006-01-19 17:29:26: TCU I/O Error
Message-ID: <mailman.316.1356283828.5077.tylansige-pcs@snf.stanford.edu>

no display. the tube seems to have shut down. It shows TCU Error on Tycom



From tberg at snf.stanford.edu  Fri Jan 20 07:12:07 2006
From: tberg at snf.stanford.edu (tberg at snf.stanford.edu)
Date: Fri, 20 Jan 2006 07:12:07 -0800
Subject: Shutdown tylansige SNF 2006-01-19 17:29:26: TCU I/O Error
Message-ID: <mailman.317.1356283828.5077.tylansige-pcs@snf.stanford.edu>

Reset breaker in source cabinet-heating up



From tberg at snf.stanford.edu  Fri Jan 20 08:07:25 2006
From: tberg at snf.stanford.edu (tberg at snf.stanford.edu)
Date: Fri, 20 Jan 2006 08:07:25 -0800
Subject: Shutdown tylansige SNF 2006-01-20 08:07:19: will not go into auto
Message-ID: <mailman.318.1356283828.5077.tylansige-pcs@snf.stanford.edu>

MFS 460 will not go into auto



From tberg at snf.stanford.edu  Fri Jan 20 09:24:20 2006
From: tberg at snf.stanford.edu (tberg at snf.stanford.edu)
Date: Fri, 20 Jan 2006 09:24:20 -0800
Subject: Shutdown tylansige SNF 2006-01-20 08:07:19: will not go into auto
Message-ID: <mailman.319.1356283828.5077.tylansige-pcs@snf.stanford.edu>

Reseated Serail comm cable-back in pump program



From aokyay at snf.stanford.edu  Fri Jan 20 16:04:49 2006
From: aokyay at snf.stanford.edu (aokyay at snf.stanford.edu)
Date: Fri, 20 Jan 2006 16:04:49 -0800
Subject: Problem tylansige SNF 2006-01-20 16:04:48: temp stab problem
Message-ID: <mailman.320.1356283828.5077.tylansige-pcs@snf.stanford.edu>

source side reads +70C more than set point even after 1.5hours of stabilization...