From seymour at snf.stanford.edu Fri Mar 7 15:24:57 2008 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Fri, 7 Mar 2008 15:24:57 -0800 Subject: Comment tylansige SNF 2008-03-07 15:24:56: stopped T/C cal Message-ID: To allow use over the weekend. The cal went through 600 degrees but didn't make 650 From libei at snf.stanford.edu Sat Mar 8 21:36:39 2008 From: libei at snf.stanford.edu (libei at snf.stanford.edu) Date: Sat, 8 Mar 2008 21:36:39 -0800 Subject: Problem tylansige SNF 2008-03-08 21:36:38: tube can't be pumped down Message-ID: There is a problem with the tube transportation. Tube can't go inside automatically. When I send it back manually, the door might not be sealed well so during the pumping step of sigepum/coat8, the pressure shows "2000" then the program ends itself. From jhpark9 at snf.stanford.edu Sun Mar 9 00:30:52 2008 From: jhpark9 at snf.stanford.edu (jhpark9 at snf.stanford.edu) Date: Sun, 9 Mar 2008 00:30:52 -0800 Subject: Shutdown tylansige SNF 2008-03-09 00:30:51: See libei's report Message-ID: From tberg at snf.stanford.edu Mon Mar 10 07:46:53 2008 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 10 Mar 2008 07:46:53 -0700 Subject: Problem tylansige SNF 2008-03-08 21:36:38: tube can't be pumped down Message-ID: Turned on Mechanical pump in SiGe pump program From tberg at snf.stanford.edu Mon Mar 10 07:47:08 2008 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 10 Mar 2008 07:47:08 -0700 Subject: Shutdown tylansige SNF 2008-03-09 00:30:51: See libei's report Message-ID: Turned on Mechanical pump in SiGe pump program