From skoh at snf.stanford.edu Wed Feb 4 15:25:00 2009 From: skoh at snf.stanford.edu (skoh at snf.stanford.edu) Date: Wed, 4 Feb 2009 15:25:00 -0800 Subject: Problem tylansige SNF 2009-02-04 15:25:00: TEMPL lower than setpoint Message-ID: The tube was in SIGEPUMP when I came in today. While the rest of the temperatures were ok, TEMPL was 5C below the setpoint. Is temperature calibration needed? From seymour at snf.stanford.edu Fri Feb 6 07:44:57 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Fri, 6 Feb 2009 07:44:57 -0800 Subject: Shutdown tylansige SNF 2009-02-06 07:44:57: starting Temp Cal Message-ID: From tberg at snf.stanford.edu Thu Feb 19 13:26:00 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Thu, 19 Feb 2009 13:26:00 -0800 Subject: Comment tylansige SNF 2009-02-19 13:25:59: Checking Hardware Message-ID: Checking element , TC etc From seymour at snf.stanford.edu Thu Feb 19 14:38:25 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Thu, 19 Feb 2009 14:38:25 -0800 Subject: Comment tylansige SNF 2009-02-19 14:38:24: checked connections on blackmax element Message-ID: All zones of element checked for continunity and lead tightness. Checked all t/c connections. turned on element breaker and setpoint is 350. I will monitor temp control. From seymour at snf.stanford.edu Fri Feb 20 14:27:30 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Fri, 20 Feb 2009 14:27:30 -0800 Subject: Shutdown tylansige SNF 2009-02-06 07:44:57: starting Temp Cal Message-ID: stopped temp cal to allow tube to run. From narii at snf.stanford.edu Fri Feb 20 22:06:41 2009 From: narii at snf.stanford.edu (narii at snf.stanford.edu) Date: Fri, 20 Feb 2009 22:06:41 -0800 Subject: Problem tylansige SNF 2009-02-20 22:06:41: SiH4 Leak alarm Message-ID: MFS alarm occurs while running chion recipe. It seems like SiH4 is leaking. From skoh at snf.stanford.edu Sun Feb 22 13:17:13 2009 From: skoh at snf.stanford.edu (skoh at snf.stanford.edu) Date: Sun, 22 Feb 2009 13:17:13 -0800 Subject: Problem tylansige SNF 2009-02-22 13:17:13: MFS:08 and MFS460 errors Message-ID: I had these error while running ROHITS recipe. From masaharu at snf.stanford.edu Tue Feb 24 21:05:32 2009 From: masaharu at snf.stanford.edu (masaharu at snf.stanford.edu) Date: Tue, 24 Feb 2009 21:05:32 -0800 Subject: Shutdown tylansige SNF 2009-02-24 21:05:32: Requet inspection Message-ID: SiH4 flow meter may have some problem. I would like to request inspection. Thank you From tberg at snf.stanford.edu Wed Feb 25 09:20:26 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 25 Feb 2009 09:20:26 -0800 Subject: Shutdown tylansige SNF 2009-02-24 21:05:32: Requet inspection Message-ID: Checked zeros and checked flows looks OK From tberg at snf.stanford.edu Thu Feb 26 10:16:40 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Thu, 26 Feb 2009 10:16:40 -0800 Subject: Shutdown tylansige SNF 2009-02-26 10:16:39: Cylinder Change Message-ID: Changing SiGe cylinder From seymour at snf.stanford.edu Fri Feb 27 07:51:49 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Fri, 27 Feb 2009 07:51:49 -0800 Subject: Shutdown tylansige SNF 2009-02-26 10:16:39: Cylinder Change Message-ID: Germane cylinder changed and leak check passes. From seymour at snf.stanford.edu Fri Feb 27 07:52:39 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Fri, 27 Feb 2009 07:52:39 -0800 Subject: Problem tylansige SNF 2009-02-27 07:52:39: needs testing after cylinder change Message-ID: