From tberg at snf.stanford.edu Mon Jun 1 09:05:26 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 1 Jun 2009 09:05:26 -0700 Subject: Comment tylansige SNF 2009-06-01 09:05:25: Pump out for repair Message-ID: From tberg at snf.stanford.edu Thu Jun 4 11:50:03 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Thu, 4 Jun 2009 11:50:03 -0700 Subject: Comment tylansige SNF 2009-06-04 11:50:02: Pump Status Message-ID: Have talked to rebuilder and hopefully it will be back on Monday. From tberg at snf.stanford.edu Mon Jun 8 11:58:09 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 8 Jun 2009 11:58:09 -0700 Subject: Comment tylansige SNF 2009-06-04 11:50:02: Pump Status Message-ID: Not Today From tberg at snf.stanford.edu Mon Jun 8 11:58:39 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Mon, 8 Jun 2009 11:58:39 -0700 Subject: Comment tylansige SNF 2009-06-08 11:58:38: Pump Status Message-ID: It looks like Tuesday From tberg at snf.stanford.edu Wed Jun 10 07:49:21 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 10 Jun 2009 07:49:21 -0700 Subject: Shutdown tylansige SNF 2009-05-29 18:11:40: Can't Pump Down Message-ID: Pump is back from repair and installed. Base pressure and leak rates good in SiGe pump program From tberg at snf.stanford.edu Wed Jun 10 07:49:41 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 10 Jun 2009 07:49:41 -0700 Subject: Comment tylansige SNF 2009-06-01 09:05:25: Pump out for repair Message-ID: Pump is back from repair and installed. Base pressure and leak rates good in SiGe pump program From tberg at snf.stanford.edu Wed Jun 10 07:49:54 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 10 Jun 2009 07:49:54 -0700 Subject: Comment tylansige SNF 2009-03-31 13:56:30: oil change completed Message-ID: Noted From tberg at snf.stanford.edu Wed Jun 10 07:50:09 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 10 Jun 2009 07:50:09 -0700 Subject: Comment tylansige SNF 2009-06-08 11:58:38: Pump Status Message-ID: Pump is back from repair and installed. Base pressure and leak rates good in SiGe pump program From tberg at snf.stanford.edu Wed Jun 10 07:50:26 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 10 Jun 2009 07:50:26 -0700 Subject: Comment tylansige SNF 2009-03-20 14:18:32: Base pressure seems higher than before Message-ID: Pump is back from repair and installed. Base pressure and leak rates good in SiGe pump program From tberg at snf.stanford.edu Wed Jun 10 07:50:47 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 10 Jun 2009 07:50:47 -0700 Subject: Problem tylansige SNF 2009-06-10 07:50:47: Needs test after pump replacement Message-ID: From skoh at snf.stanford.edu Wed Jun 10 08:20:14 2009 From: skoh at snf.stanford.edu (skoh at snf.stanford.edu) Date: Wed, 10 Jun 2009 08:20:14 -0700 Subject: Problem tylansige SNF 2009-06-10 08:20:13: MFS Error 80 and I/O Error Message-ID: Running Coat8 program. There is MFS 80 Error, and some kind of I/O error, the gas flows and pressure values have "?" after the numbers. From tberg at snf.stanford.edu Wed Jun 10 08:41:55 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 10 Jun 2009 08:41:55 -0700 Subject: Comment tylansige SNF 2009-06-10 08:41:54: Rezeroing MFS 460 Message-ID: From tberg at snf.stanford.edu Wed Jun 10 12:47:25 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 10 Jun 2009 12:47:25 -0700 Subject: Problem tylansige SNF 2009-06-10 08:20:13: MFS Error 80 and I/O Error Message-ID: Rezeroed mfcs and ran coat 8 successfully From tberg at snf.stanford.edu Wed Jun 10 12:47:43 2009 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Wed, 10 Jun 2009 12:47:43 -0700 Subject: Comment tylansige SNF 2009-06-10 08:41:54: Rezeroing MFS 460 Message-ID: done and coat 8 run From narii at snf.stanford.edu Thu Jun 11 13:48:35 2009 From: narii at snf.stanford.edu (narii at snf.stanford.edu) Date: Thu, 11 Jun 2009 13:48:35 -0700 Subject: Problem tylansige SNF 2009-06-11 13:48:35: MFS error 80 in coat8 run Message-ID: MFS error again while running coat8 recipe From seymour at snf.stanford.edu Thu Jun 11 15:29:46 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Thu, 11 Jun 2009 15:29:46 -0700 Subject: Problem tylansige SNF 2009-06-11 13:48:35: MFS error 80 in coat8 run Message-ID: found the N2/AR MFC not at zero when gas off. Adjusted MFC and did auto zero routine on the MFS460 controller. Put tube in sigepump recipe. From narii at snf.stanford.edu Thu Jun 11 22:04:01 2009 From: narii at snf.stanford.edu (narii at snf.stanford.edu) Date: Thu, 11 Jun 2009 22:04:01 -0700 Subject: Problem tylansige SNF 2009-06-11 22:04:01: MFS error 80: H2 doesn't flow Message-ID: Even if output says it should, H2 gas doesn't flow. Module at the back shows H2 flow is blocked From seymour at snf.stanford.edu Fri Jun 12 08:03:19 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Fri, 12 Jun 2009 08:03:19 -0700 Subject: Problem tylansige SNF 2009-06-11 22:04:01: MFS error 80: H2 doesn't flow Message-ID: H2 interlock error on MFS460. Checked recipes and no requirements for other conditions listed for H2 to flow. Checked all MFS460 connections and H2 now flows. Put tube in sigepump recipe. From maurice at snf.stanford.edu Tue Jun 16 09:03:04 2009 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Tue, 16 Jun 2009 09:03:04 -0700 Subject: Problem tylansige SNF 2009-06-10 07:50:47: Needs test after pump replacement Message-ID: Narii reports that his run went as expected. From maurice at snf.stanford.edu Wed Jun 17 14:03:08 2009 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 17 Jun 2009 14:03:08 -0700 Subject: Problem tylansige SNF 2009-06-17 14:03:07: temps not stable Message-ID: Skoh reports temps not stable even after sitting on coat program for a couple of days. From narii at snf.stanford.edu Wed Jun 17 23:30:53 2009 From: narii at snf.stanford.edu (narii at snf.stanford.edu) Date: Wed, 17 Jun 2009 23:30:53 -0700 Subject: Problem tylansige SNF 2009-06-17 23:30:52: Tube has some peelings. Message-ID: Found some peelings. Need to be cleaned. From seymour at snf.stanford.edu Thu Jun 18 07:36:52 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Thu, 18 Jun 2009 07:36:52 -0700 Subject: Shutdown tylansige SNF 2009-06-18 07:36:51: starting temp cal Message-ID: From seymour at snf.stanford.edu Tue Jun 23 07:45:22 2009 From: seymour at snf.stanford.edu (seymour at snf.stanford.edu) Date: Tue, 23 Jun 2009 07:45:22 -0700 Subject: Comment tylansige SNF 2009-06-23 07:45:21: Germane cylinder changed Message-ID: tube will need a test when temp cal completed.